The figure shows the 8-position version of the product
1440928
Official DistributorSKU
PHX1440928
MPN
SACC-MCI-M12MS-8CON
Weight
0.001 kg
Series SACC-MCI-M
SACC-MCI-M12MS-8CON - Contact carrier
Contact carrier, 8-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Crimp connection, 0.25 mm2
- Convenient field assembly: device connectors for fast on-site mounting
- Contact carriers that are designed for assembly or available with preassembled litz wires
- Standard pin assignments for signal and power transmission with a uniform design-in design
Technical Specifications
Notes
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Product properties
| Number of Positions | 8 |
| No. of cable outlets | 1 |
| Seal present | no |
| Shielded | no |
| Coding | A |
| Thread type | M12 |
Insulation characteristics
| Overvoltage category | II |
| Degree of pollution | 3 |
Electrical properties
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 30 V |
| Nominal current IN | 2 A |
Connection data
| Connection Method | Crimp connection |
Signaling
| Status display | No |
| Status display present | No |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact carrier material | PA 6.6 |
Connection 1
| Head design | Pin |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | A |
Cable/line
| Cable cross section | 0.25 mm² |
Mechanical data
| Insertion/withdrawal cycles | > 100 |
Ambient conditions
| Degree of Protection | IP67 |
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -25 °C ... 85 °C (Plug / socket) |
| Ambient Temperature (Operation) | -40 °C ... 85 °C (without mechanical actuation) |
M12
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |
Mounting
| Mounting Type | Front mounting Square flange 25 mm side length |
| Assembly instructions | 25 mm side length |
Accessories
CC-0,8-ST-0,34-MS AU - Crimp contact, Pin, turned, contact diameter: 0.8 mm, crimp range: 0.08 mm2 ... 0.34 mm2, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239799
SACC-MSQ-M12MS-25-3,2 SCO - Housing screw connection, M12-SPEEDCON, Front mounting, square flange 25 mm side length, Square flange
M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
Why Proax for Phoenix Contact 1440928?
Proax is an authorized distributor of Phoenix Contact 1440928 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 10 |
Recommended
SACC-MCI-M12MS-8CON/0,5 - Contact carrier, 8-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239848
SACC-MCI-M12MS-5CON/0,5 - Contact carrier, Universal, 5-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239712
SACC-MCI-M12MS-4CON - Contact carrier, 4-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Crimp connection, 0.34 mm2- SACC-MCI-M12MS-4CON/0,5 - Contact carrier, 4-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239711
SACC-MCI-M12MSD-4CON - Contact carrier, PROFINET CAT5 (IEC 11801:2002), 4-position, Pin, straight, M12, coding: D, Front mounting, Square flange, Crimp connection, 0.34 mm2
SACC-MCI-M12MSD-4CON/0,5 - Contact carrier, 4-position, Pin, straight, M12, coding: D, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239713
SACC-MCI-MST-4CON/0,5 SCO - Contact carrier, Power, 4-position, Pin, straight, M12-SPEEDCON, coding: T, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 1.31 mm2, UL/cUL stranded hook-up wire
SACC-MINFR-3CON-PG 9 - Connector, Universal, 3-position, Socket angled 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
SACC-MINFR-4CON-PG 9 - Connector, Universal, 4-position, Socket angled 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
SACC-MINFR-5CON-PG13/2,5 - Connector, Universal, 5-position, Socket angled 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg13,5, external cable diameter 10 mm ... 12 mm
SACC-MINFR-5CON-PG11/2,5 - Connector, Universal, 5-position, Socket angled 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm
SACC-MINFR-5CON-PG 9 - Connector, Universal, 5-position, Socket angled 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
SACC-MINFS-3CON-PG13 - Connector, Universal, 3-position, Socket straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg13,5, external cable diameter 10 mm ... 12 mm
SACC-MINFS-3CON-PG 9 - Connector, Universal, 3-position, Socket straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
SACC-MINFS-4CON-PG13 - Connector, Universal, 4-position, Socket straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg13,5, external cable diameter 10 mm ... 12 mm
SACC-MINFS-4CON-PG 9 - Connector, Universal, 4-position, Socket straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm
SACC-MINFS-5CON-PG16 - Connector, Universal, 5-position, Socket straight 7/8"-16UNF, coding: A, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg16, external cable diameter 12 mm ... 14 mm
