CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
Cart
Phoenix Contact 1108542
AllIndustrial communication & NetworkingIndustrial EthernetSmart camera box for video surveillance

1108542

Official Distributor

By Phoenix Contact

SKU
PHX1108542
MPN
SCX 4POE 2T
Weight
4.999 kg
Series SCX

SCX 4POE 2T - Industrial Ethernet Switch

Smart Ethernet Box for connecting PoE end devices, four PoE ports, two uplink ports (RJ45), integrated managed switch and surge protection, supply voltage 100 ... 240 V AC, wall or mast mounting

  • Cost savings with an all-in-one solution that provides all functions in a single device
  • Significant time savings with adapter for wall and mast mounting
  • Minimal wiring effort
  • Replaceable surge protection
  • A wide range of alarm messages via SNMP, such as in the event of sabotage attempts or defective surge protection
  • Advanced PoE management for reliable operation of IP cameras
  • Quick and easy startup and configuration via web-based management or the FL Network Manager software

Documents

Technical Specifications

Dimensions

Width284 mm
Height364 mm
Depth121 mm

Note on application

Note on applicationOnly for industrial use

Material specifications

Color (Housing)light gray (RAL 7035)
Material (Housing)Polycarbonate
Material (Cable gland)Polyamide
Material (Cable gland seal)Neoprene
Flammability rating according to UL 94V0 (Housing, a vertically clamped sample is extinguished within 10 seconds, no flaming droplets of molten plastic, smoldering for a maximum of 60 seconds)
Flammability rating according to UL 94V2 (Cable gland; a vertically tensioned sample is extinguished within 30 seconds; flaming droplets are permitted)

Mounting

Mounting TypePanel mounting
Mounting TypeMast mounting

Interfaces

Basic FunctionsStore-and-forward switch, complies with IEEE 802.3

Data: Ethernet / Fast Ethernet / Gigabit Ethernet

Transmission Speed10/100/1000 Mbps
Connection MethodRJ45 jack
Note on the connection methodAuto negotiation and autocrossing
No. of channels4 (RJ45 ports)
Transmission length100 m (per segment)
Transmission mediumCopper
Maximum output power165 W (>55°C derating, see data sheet)
Maximum output power155 W (If switching output is active, >55°C derating)
Maximum output power90 W (per port POE1...3, >50°C derating, see data sheet)
Maximum output power30 W (POE4)
Transmission Speed10/100/1000 Mbps
Connection MethodRJ45 jack
No. of channels2 (RJ45 ports)
Transmission length100 m (per segment)
Transmission mediumCopper

Data: Configuration interface

Connection MethodRJ45 jack
No. of channels1 (RJ45 port)

Data: Switching output

Connection MethodPush-in spring connection
No. of channels1 (Push-in Technology)
Single conductor/terminal point, rigid0.2 mm² ... 1.5 mm²
Single-wire/terminal point, flexible0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 0.75 mm² (Stripping length 8 mm)
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm² (Stripping length 8 mm)
Max. AWG conductor cross section, flexible16
Min. AWG conductor cross section, flexible24
Stripping length10 mm
Load/Output Load Current Outputno inductive load
Output nominal voltage24 V DC ±10 % (Supply for devices within the Smart Ethernet Box)
Output Current300 mA (typical)

Product properties

Product familySmart Ethernet Box
MTTF441 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
MTTF224 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
MTTF92 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)

Insulation characteristics

Protection classI (Protective grounding of all conductive housing parts)
Overvoltage categoryIII (With protection modules plugged in)
Overvoltage categoryII (Without protection modules)
Pollution degree2

Switch functions

Diagnostic functionsRMON History
Diagnostic functionsLLDP (Link Layer Discovery Protocol)
Diagnostic functionsSNMP traps
Diagnostic functionsN:1-Portmirroring
Diagnostic functionsACD (Address Conflict Detection)
Basic FunctionsStore-and-forward switch, complies with IEEE 802.3
Filter functionsPort prioritization
Filter functionsVLAN (up to 32 VLANs)
IP parameterizationDHCP client
IP parameterizationBootP
IP parameterizationStatic IP address
MAC address table8k
ManagementWeb-based management (HTTP/HTTPS)
ManagementSNMPv2/v3
ManagementCommand Line Interface (Telnet, SSH)
RedundancyRSTP (Rapid Spanning Tree Protocol in accordance with IEEE 802.1D-2004)
RedundancyLarge Tree Support
RedundancyFRD (Fast Ring Detection)
Additional functionsJumbo frames
Time synchronizationSNTP (Simple Network Time Protocol)

Security functions

Basic FunctionsStore-and-forward switch, complies with IEEE 802.3

Electrical properties

Maximum power dissipation for nominal conditionmin. 7 W (at 230 V AC, standby mode)
Rated Insulation Voltage3 kV AC (Input / output, IEC/EN 60950-1)

Supply

Supply Voltage Range100 V AC ... 240 V AC -15 % ... +10 % (Single-phase)
Connection MethodPush-in spring connection
Conductor cross section flexible, with ferrule without plastic sleeve0.2 mm² ... 4 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.2 mm² ... 4 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve0.5 mm² ... 1.5 mm²
Single conductor/terminal point, rigid1 mm² ... 6 mm²
Single-wire/terminal point, flexible0.2 mm² ... 6 mm²
Conductor cross section, flexible [AWG]24 ... 10
Stripping length10.00 mm

Ambient conditions

Degree of ProtectionIP65 (in accordance with DIN EN 60529: Complete touch protection, dust cannot enter, spray water from any direction)
Impact strengthIK10 (in accordance with IEC 62262: Impact energy of 20 J, corresponds to 5 kg from a height of 40 cm)
Ambient Temperature (Operation)-40 °C ... 70 °C (>50°C derating)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude2000 m
Permissible humidity (operation)10 % ... 95 % (non-condensing)

Standards and Regulations

Other resistanceUV-resistant in accordance with UL746C, f1 listing/rating (Outdoor housing, subject to 1,000 hour xenon weather testing, 7-day water submergence test)
Standards/regulationsIEC 62444
Standard designationStrain relief
Standards/regulationsIEC 61249-2-21
Standard designationHalogen-free (housing, bromine: <900 ppm, chlorine: <900 ppm, total halogen content: <1,500 ppm)
Standards/regulationsDIN EN 45545-2, requirement set R22, hazard level HL3
Standard designationFire protection

CE

CertificateCE-compliant

UL, USA/Canada

IdentificationListed
IdentificationUL 61010-1, 3rd Edition
IdentificationUL 61010-2-201, 2nd Edition
IdentificationCAN/CSA C22.2 No. 61010-1-12
IdentificationCSA C22.2 No. 61010-2-201:18

Corrosive gas test

IdentificationISA-S71.04-1985 G3 Harsh Group A

EMC data

Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise immunityEN 61000-6-2
Conducted noise emissionEN 61000-6-3 Class B, domain of use: residential and small commercial
Noise emissionEN 61000-6-4, Class B, domain of use: residential and small commercial

Electrostatic discharge

Standards/regulationsEN 61000-4-2
Contact discharge± 6 kV
Discharge in air± 8 kV
Indirect discharge± 6 kV
CommentsCriterion B

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Frequency Range80 MHz ... 3 GHz (80% amplitude modulation with 1 kHz)
Field intensity10 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input± 2.2 kV (1 minute)
Signal± 2.2 kV (1 minute)
CommentsCriterion B

Surge current load (surge)

Standards/regulationsEN 61000-4-5
Input± 1 kV (AC supply, line to line)
Input± 2 kV (AC supply, line to ground)

Conducted interference

Standards/regulationsEN 61000-4-6
Frequency Range0.15 MHz ... 80 MHz (80% amplitude modulation with 1 kHz)
CommentsCriterion A
Voltage10 V

Emitted interference

Standards/regulationsEN 61000-6-4
CommentsClass B, domain of use: residential and small commercial

Criteria

Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Functionality

Basic FunctionsStore-and-forward switch, complies with IEEE 802.3
Accessories
  • 2798844
    2798844
    Type 2 surge protection plug - VAL-MS 230 ST
  • 2856595
    2856595
    Type 2 surge protection plug - VAL-MS 350 VF ST
  • 1184401
    1184401
    SCX-DOOR-LOCK - Stable door lock with locking tab for securely locking the Smart Ethernet Box, protects against unauthorized access, for a padlock with a shackle diameter of up to 12 mm
  • 2702889
    2702889
    FL NETWORK MANAGER BASIC - SNMP-based software for easy commissioning and monitoring of network components such as switches, routers, and WLAN access points
  • 1085485
    1085485
    FL DIN-RAIL ADAPTER 22.5 - The FL DIN-RAIL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.
  • 1085484
    1085484
    FL DIN-RAIL ADAPTER 40 - The FL DIN-RAIL ADAPTER 40 is designed to allow products 40 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.

Why Proax for Phoenix Contact 1108542?

Proax is an authorized distributor of Phoenix Contact 1108542 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • 1102626
    1102626
    SCX 4POE 2LX - Smart Ethernet Box for connecting PoE end devices, four PoE ports, two uplink ports (SFP slots), integrated managed switch, surge protection, and splice tray, supply voltage 100 ... 240 V AC, wall or mast mounting

CAD$2,300.00

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability