Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
REL-MR-120AC/21HC AU
Weight
0.016 kg
This product is Not Cancellable/Not Returnable
Series REL-MR

REL-MR-120AC/21HC AU - Single relay

Plug-in miniature power relay, with multi-layer gold contact for high continuous currents, 1 changeover contact, input voltage 120 V AC

  • RT III-proof (wash-proof)
  • Switching current of up to 16 A
Technical Specifications

Product properties

Operating mode100% operating factor
Mechanical service life1x 107 cycles

Insulation characteristics

Overvoltage categoryIII
Pollution degree3

Electrical properties

Service life electricalsee diagram
Maximum power dissipation for nominal condition0.84 W
Test voltage (Winding/contact)5 kV AC (50 Hz, 1 min., winding/contact)

Coil side

Nominal input voltage UN120 V AC
Input voltage range93.6 V AC ... 186 V AC
Mains frequency50/60 Hz
Drive and functionmonostable
Drive (polarity)non-polarized
Typical input current at UN7 mA (at 50 Hz)
Typical input current at UN5 mA (At 60 Hz)
Typical response time3 ms ... 12 ms (depending on phase relation)
Typical release time range2 ms ... 9 ms (depending on phase relation)
Coil resistance8100 Ω ±15 % (at 20 °C)

Switching

Contact switching type1 changeover contact
Type of switch contactSingle contact
Contact MaterialAgNi, hard gold-plated
Maximum Switching Voltage30 V AC
Maximum Switching Voltage36 V DC
Minimum Switching Voltage100 mV (at 10 mA)
Limiting Continuous Current50 mA
Maximum Inrush Current50 mA
Min. switching current1 mA (at 24 V)
Interrupting rating (ohmic load) max.1.2 W (at 24 V DC)
Switching capacity2 A (at 24 V, AC15)

Switching: when the gold layer is destroyed

Notethe following values are applicable if a gold layer is destroyed
Contact MaterialAgNi
Maximum Switching Voltage250 V AC/DC
Minimum Switching Voltage12 V (at 10 mA)
Limiting Continuous Current16 A
Maximum Inrush Current50 A (20 ms)
Min. switching current10 mA (at 12 V)
Interrupting rating (ohmic load) max.384 W (at 24 V DC)
Interrupting rating (ohmic load) max.58 W (at 48 V DC)
Interrupting rating (ohmic load) max.48 W (at 60 V DC)
Interrupting rating (ohmic load) max.50 W (at 110 V DC)
Interrupting rating (ohmic load) max.80 W (at 220 V DC)
Interrupting rating (ohmic load) max.4000 VA (for 250 V AC)
Switching capacity2 A (at 24 V, DC13)
Switching capacity0.2 A (at 110 V, DC13)
Switching capacity0.2 A (at 250 V, DC13)
Switching capacity2 A (at 24 V, AC15)
Switching capacity2 A (at 120 V, AC15)
Switching capacity2 A (at 250 V, AC15)

Connection data

Connection MethodPlug / solder connection

Dimensions

Width12.7 mm
Height29 mm
Depth15.7 mm

Material specifications

Colorwhite (RAL 9010)

Ambient conditions

Ambient Temperature (Operation)-40 °C ... 85 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C

Corrosive gas test

IdentificationISA-S71.04. G3 Harsh Group
IdentificationEN 60068-2-60

Standards and Regulations

Standards/regulationsIEC 60664
Standards/regulationsEN 50178
Standards/regulationsEN 61810-1

Mounting

Assembly instructionsCan be aligned without spacing (> 70 °C ≥ 2.5 mm)
Mounting Positionany

Why Proax for Phoenix Contact 2961516?

Proax is an authorized distributor of Phoenix Contact 2961516 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size10
Recommended
Sold in quantities of 10

Available for order

Phoenix Contact Availability