Official DistributorSKU
MPN
TC-D37SUB-ADIO16-M-P-UNI
Weight
1.17 kg
This product is Not Cancellable/Not Returnable
Series TC-D
TC-D37SUB-ADIO16-M-P-UNI - Module carrier
Universal termination carrier for connecting 16 MINI Analog signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)
- Mechanically decoupled, passive PCB
- Robust aluminum profile with integrated DIN rail
- Side parts with integrated end clamps
- D-SUB pin strip system connection, 37-pos. (1:1 connection)
- Simple or redundant supply (decoupled from diode, protected against polarity reversal) and monitoring function implemented via separate DIN rail module
- Cable sets for signal connection are supplied as standard and do not have to be ordered separately
Technical Specifications
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Insulation characteristics
| Insulation | Basic insulation |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Basic insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Max. permissible current | < 1 A (Signal/channel) |
| Nominal voltage UN | < 30 V DC (Per signal/channel) |
Air clearances and creepage distances
| Rated Insulation Voltage | 50 V |
| Rated surge voltage | 0.5 kV |
Supported controller universal
| Suitable I/O card | universal |
Supply
| Designation | Power module |
| Note | Power supply via 2902958 MINI MCR-SL-PTB-FM power terminal and 2902961 MINI MCR-SL-FM-RC-NC error signaling module. |
| Fuse | 2x 2.5 A on PCB, slow-blow (replaceable) |
| Input Voltage | 24 V DC |
| Input voltage range | 19.2 V DC ... 30 V DC |
| Input Current | ≤ 2 A |
| Redundant supply | yes, decoupled from diodes |
| Polarization and surge protection | Yes |
| Output name | Switching output |
| Contact switching type | 1 N/C contact (alarm = open) |
| Maximum Switching Voltage | 30 V DC (50 mA) |
Power supply
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Number of Connections | 1 |
| Number of Positions | 6 |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Controller level
| Connection Method | D-SUB pin strip |
| Number of Connections | 1 |
| Number of Positions | 37 |
Signaling
| Status display | 2 x red LED (error) |
| Status display | 2x green LEDs (PWR1 and PWR2) |
Dimensions
| Width | 136 mm |
| Height | 170 mm |
| Depth | 159.5 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
Ambient conditions
| Degree of Protection | IP00 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C (Please observe module specifications) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Shock | 15g, according to IEC 60068-2-27 |
| Vibration (Operation) | 2g, according to IEC 60068-2-6 |
ATEX
| Identification | II 3 G Ex nA IIC T4 Gc X |
UKCA Ex (UKEX)
| Identification | II 3 G Ex nA IIC T4 Gc |
| Certificate | PxCIF21UKEX2902933X |
UL, USA/Canada
| Identification | UL 61010 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T4 |
| Identification | Class I, Zone 2, Group IIC |
Air clearances and creepage distances
| Standards/regulations | EN 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | No end clamp |
| Mounting Position | vertical, horizontal |
Why Proax for Phoenix Contact 2902933?
Proax is an authorized distributor of Phoenix Contact 2902933 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
TC-D37SUB-ADIO16-EX-P-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)
TC-D37SUB-AIO16-EX-PS-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
TC-D25SUBF-AI16-MP-P-RX7I - Termination Carrier for connecting 16 MINI Analog Pro signal conditioners to analog input cards of the GE PAC RX7i controller via D-SUB connector, 25-pos.
