Official DistributorSKU
MPN
2882925
Weight
0.325 kg
DT-TELE-RJ45 - Surge protection device
Attachment plug with surge protection for analog and digital telecommunications interfaces (VDSL up to 50 Mbps). Connection: RJ45 (RJ12/RJ11) and screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.
- Easy network integration via RJ45/COMBICON connection
- No signal interference with adapted protective circuit
- Can be installed in a control cabinet by removing the ground connection adapter
Technical Specifications
Product properties
| Product family | DATATRAB |
| IEC test classification | B2 |
| IEC test classification | C1 |
| IEC test classification | C2 |
| IEC test classification | C3 |
| IEC test classification | D1 |
| Type | Attachment plug for DIN rail mounting |
| Number of Positions | 4 |
| Wire pairs per module | 2 |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Connection data
| Connection Method | RJ45 / COMBICON |
| Screw thread | M2 |
| Tightening torque | 0.22 Nm |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
Dimensions
| Width | 25 mm |
| Height | 102 mm |
| Depth | 63.5 mm |
Material specifications
| Color | Silver |
| Color | black (RAL 9005) |
| Housing Material | Zinc die-cast |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | Line-Line & Line-Ground/Shield |
| Maximum continuous voltage UC | 185 V DC |
| Maximum continuous voltage UC | 130 V AC |
| Rated current | ≤ 380 mA (25 °C) |
| Operating effective current IC at UC | ≤ 6 µA |
| Residual current IPE | ≤ 4 µA |
| Nominal discharge current In (8/20) µs (line-line) | ≤ 5 kA |
| Nominal discharge current In (8/20) µs (line-ground) | ≤ 5 kA |
| Total discharge current Itotal (8/20) µs | 10 kA |
| Nominal pulse current Ian (10/1000) µs (line-line) | 100 A |
| Nominal pulse current Ian (10/1000) µs (line-earth) | 100 A |
| Nominal pulse current Ian (10/700) µs (line-line) | 150 A |
| Nominal pulse current Ian (10/700) µs (line-earth) | 150 A |
| Output voltage limitation at 1 kV/µs (line-line) static | ≤ 250 V |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 250 V |
| Residual voltage at In (conductor-conductor) | ≤ 120 V |
| Residual voltage at In (conductor-ground) | ≤ 120 V |
| Voltage protection level Up (line-line) | ≤ 250 V (B2 - 4 kV / 100 A) |
| Voltage protection level Up (line-line) | ≤ 250 V (C1 - 1 kV / 500 A) |
| Voltage protection level Up (line-line) | ≤ 250 V (C2 - 10 kV / 5 kA) |
| Voltage protection level Up (line-earth) | ≤ 250 V (B2 - 4 kV / 100 A) |
| Voltage protection level Up (line-earth) | ≤ 250 V (C1 - 1 kV / 500 A) |
| Voltage protection level Up (line-earth) | ≤ 250 V (C2 - 10 kV / 5 kA) |
| Response time tA (line-line) | ≤ 100 ns |
| Response time tA (line-earth) | ≤ 100 ns |
| Input attenuation aE, sym. | typ. 0.5 dB (≤ 5 MHz / 100 Ω) |
| Input attenuation aE, sym. | typ. 0.3 dB (≤ 8 MHz / 150 Ω) |
| Input attenuation aE, sym. | typ. 0.3 dB (≤ 2.5 MHz / 600 Ω) |
| Cut-off frequency fg (3 dB), sym. in 100 Ω system | typ. 50 MHz |
| Capacity (core-core) | typ. 20 pF (f= 1 MHz / VR= 0 V) |
| Capacity (core-earth) | typ. 20 pF (f= 1 MHz / VR= 0 V) |
| Resistance per path | 3.3 Ω 10 % |
| Surge protection fault message | none |
| Impulse durability (line-line) | B2 - 4 kV / 100 A |
| Impulse durability (line-line) | C1 - 1 kV / 500 A |
| Impulse durability (line-line) | C2 - 10 kV / 5 kA |
| Impulse durability (line-earth) | B2 - 4 kV / 100 A |
| Impulse durability (line-earth) | C1 - 1 kV / 500 A |
| Impulse durability (line-earth) | C2 - 10 kV / 5 kA |
| Impulse durability (line-earth) | D1 - 1 kA |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Standards and Regulations
| Standards/specifications | IEC 61643-21 |
| Note | 2012 |
| Standards/specifications | EN 61643-21 |
| Note | 2013 |
Mounting
| Mounting Type | Connection-specific attachment plug and DIN rail, 35 mm |
Accessories
Why Proax for Phoenix Contact DT-TELE-RJ45?
Proax is an authorized distributor of Phoenix Contact DT-TELE-RJ45 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | DTTELERJ45 |
| Pack Size | 1 |
Recommended
2801593 - Attachment plug with surge protection for two SHDSL telecommunications interfaces (ports). Connection: RJ45 (RJ12/RJ11) and plug-in screw terminal block (COMBICON). Alternatively, can be snapped onto a DIN rail.