Official DistributorSKU
MPN
D-LAN-19"-4
Weight
3.111 kg
This product is Not Cancellable/Not Returnable
Series D-LAN
D-LAN-19"-4 - Surge protection device
19" rack with 4 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets
- Space saving with low installed height (1RU)
- Easy network integration via RJ45 jacks
- Can be used in applications up to 1 Gbps with adapted protective circuit
- Easy to extend with the modular design
Technical Specifications
Product properties
| Product family | DATATRAB |
| IEC test classification | C1 |
| IEC test classification | C2 |
| IEC test classification | C3 |
| IEC test classification | B3 |
| Type | 19" rack patch module |
| Number of Positions | 4 |
| Surge protection fault message | none |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Connection data
| Connection Method | RJ45 |
Dimensions
| Width | 483 mm |
| Height | 44 mm |
| Height unit | 1 U |
| Depth | 160 mm |
Material specifications
| Housing Material | Sheet steel |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | Line-Line & Line-Signal Ground/Shield & Signal Ground/Shield-Earth Ground |
| Maximum continuous voltage UC | 6 V DC (Core - core) |
| Maximum continuous voltage UC (line-earth) | 68 V DC (optional: ±6 V DC) |
| Rated current | 1.5 A (25 °C) |
| Operating effective current IC at UC | ≤ 1 mA |
| Residual current IPE | ≤ 1 mA (jumper 2 unplugged) |
| Nominal discharge current In (8/20) µs (line-line) | 350 A |
| Nominal discharge current In (8/20) µs (line-ground) | 350 A |
| Nominal discharge current In (8/20) µs (shield-ground) | 2.5 kA (with insulated housing) |
| Total discharge current Itotal (8/20) µs | 10 kA |
| Nominal pulse current Ian (10/1000) µs (line-line) | 100 A |
| Nominal pulse current Ian (10/1000) µs (line-earth) | 100 A |
| Output voltage limitation at 1 kV/µs (line-line) static | ≤ 20 V |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 30 V (J2 plugged) |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 170 V (J2 unplugged) |
| Output voltage limitation at 1 kV/µs(shield-ground) static | ≤ 700 V (with insulated shield) |
| Residual voltage at In (conductor-conductor) | ≤ 65 V |
| Residual voltage at In (conductor-ground) | ≤ 45 V (J2 ON) |
| Residual voltage at In (conductor-ground) | ≤ 220 V (J2 OFF) |
| Residual voltage at In (shield-ground) | ≤ 700 V |
| Voltage protection level Up (line-line) | ≤ 50 V (C1 - 500 V / 250 A) |
| Voltage protection level Up (line-earth) | ≤ 40 V (C1 - 500 V / 250 A (J2 ON)) |
| Voltage protection level Up (line-earth) | ≤ 180 V (C1 - 500 V / 250 A (J2 OFF)) |
| Voltage protection level Up (shield-ground) | ≤ 800 V (with insulated housing) |
| Response time tA (line-line) | ≤ 1 ns |
| Response time tA (line-earth) | ≤ 1 ns |
| Response time tA (line-shield) | ≤ 100 ns |
| Input attenuation aE, sym. | typ. 1 dB (≤ 100 MHz) |
| Near-end crosstalk attenuation | typ. 36 dB (100 Ω system / 100 MHz) |
| Cut-off frequency fg (3 dB), sym. in 100 Ω system | > 100 MHz |
| Capacity (core-core) | typ. 20 pF |
| Capacity (core-earth) | typ. 1 pF |
| Surge protection fault message | none |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 80 °C |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 |
Standards Information technology specification
| Standards/regulations | IEC 61643-21 |
| Standards/regulations | DIN EN 50173-1 |
| Standards/regulations | IEC 61643-21 |
| Standards/regulations | DIN EN 50173-1 |
| Standards/specifications | IEC 61643-21 |
| Note | 2000 |
Mounting
| Mounting Type | 19" rack |
Why Proax for Phoenix Contact 2880176?
Proax is an authorized distributor of Phoenix Contact 2880176 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2880163 - 19" rack with 8 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets
2838791 - 19" rack with 24 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets
2880147 - 19" rack with 16 surge protected ports for data interfaces in Ethernet (1000Base-T), Token Ring and FDDI/CDDI networks in acc. with Class D/EN 50173 (CAT5e), connection on the protective device: RJ45 sockets
2880192 - Replacement PCB for ""D-LAN-19""..."" products. Assembly with four surge-protected ports for data interfaces in acc. with Cat.5/EN 50 17 3 (100Base-T) incl. RJ45 connection sockets.
2858991 - Fine surge protection in accordance with Class D (CAT.5e), for token ring and Ethernet. RJ45 attachment plug with separate grounding cable, incl. RJ45 cable
2859084 - Fine surge protection in accordance with Class D (CAT.5e), for token ring and Ethernet. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35/7.5 DIN rails
2800763 - Surge protection for data networks up to 1 Gbps. For use in Ethernet, Power over Ethernet (PoE, mode A and mode B), token ring, ISDN, and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.
2800723 - Fine surge protection for data networks up to 1 Gbps. For use in Ethernet, Power over Ethernet (PoE, mode A and mode B), token ring, ISDN, and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.