Official DistributorSKU
MPN
CABLE-D-25SUB/F/OE/0,25/S/0,5M
Weight
0.119 kg
This product is Not Cancellable/Not Returnable
Series CABLE-D
CABLE-D-25SUB/F/OE/0,25/S/0,5M - Cable
Assembled shielded round cable; connection 1: Single wires (25-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end.); connection 2: D-SUB socket strip (1x 25-position); cable length: 0.5 m
- Individual wire marking: 1, 2, 3, 4, etc.
- Individual wires fitted with ferrules
- Connector in accordance with IEC 60807-2/DIN 41652
- 1:1 connection
- Open end at one end
- D-SUB socket or pin strip at one end
- Screw connection: 2 UNC 4-40 screws
- Shield connection: H05V-K 1 mm² cable, black, length: 0.5 m
Technical Specifications
Ambient conditions
| Degree of Protection | IP20 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (fixed installation) |
| Ambient Temperature (Operation) | -10 °C ... 70 °C (flexible installation) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
Electrical properties
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 60 V DC |
| Nominal operating mode | 100% operating factor |
| Current (Per path) | ≤ 2 A (Uncoiled, see derating) |
Cable/line
| Cable Length | 0.5 m |
25X0.25 [PVC]
| UL AWM style | 2464/1061 |
| Number of Positions | 25 |
| Shielded | yes |
| Cable Type | 25X0.25 [PVC] |
| Conductor type | Assembled shielded round cable |
| Conductor structure signal line | 14x 0.15 mm |
| AWG Signal Line | 24 |
| Conductor Cross Section | 25x 0.25 mm² |
| Wire diameter incl. insulation | 1.2 mm ±0.05 mm |
| External Cable Diameter | 9.80 mm ±0.5 mm |
| Outer sheath, material | Semi-rigid PVC |
| External sheath, color | gray |
| Conductor material | Bare Cu litz wires |
| Cable resistance | ≤ 80 Ω/km (at 20 °C) |
| Insulation resistance | ≥ 20 MΩ*km (at 20 °C) |
| Smallest bending radius, fixed installation | 82 mm |
| Smallest bending radius, movable installation | 155 mm |
| Max. bending cycles | 5000 (at a radius of ≥ 15x outside diameter) |
| Halogen-free | no |
| Flame resistance | IEC 60332-1-2 (raw cable) |
| Flame resistance | VDE 0842, Part 332-1-2 (raw cable) |
| Flame resistance | IEC 60332-3-22 (raw cable) |
| Flame resistance | UL VW-1 |
| Flame resistance | CSA FT-1 |
| Resistance to Oil | can withstand occasional splashes (raw cable) |
| D-SUB25 (1) | () = white |
| D-SUB25 (2) | () = brown |
| D-SUB25 (3) | () = green |
| D-SUB25 (4) | () = yellow |
| D-SUB25 (5) | () = gray |
| D-SUB25 (6) | () = pink |
| D-SUB25 (7) | () = blue |
| D-SUB25 (8) | () = red |
| D-SUB25 (9) | () = black |
| D-SUB25 (10) | () = violet |
| D-SUB25 (11) | () = gray-pink |
| D-SUB25 (12) | () = red-blue |
| D-SUB25 (13) | () = white-green |
| D-SUB25 (14) | () = brown-green |
| D-SUB25 (15) | () = white-yellow |
| D-SUB25 (16) | () = yellow-brown |
| D-SUB25 (17) | () = white-gray |
| D-SUB25 (18) | () = gray-brown |
| D-SUB25 (19) | () = white-pink |
| D-SUB25 (20) | () = pink-brown |
| D-SUB25 (21) | () = white-blue |
| D-SUB25 (22) | () = brown-blue |
| D-SUB25 (23) | () = white-red |
| D-SUB25 (24) | () = brown-red |
| D-SUB25 (25) | () = white-black |
Connection 1
| Connection Method | Single wires |
| Stripping length (Sheath) | 150 mm |
| Number of Positions | 25 |
| Note | The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end. |
Connection 2
| Connection in acc. with standard | IEC 60807-2 |
| Connection in acc. with standard | DIN 41652 |
| Connection Method | D-SUB socket strip |
| Screw thread | UNC 4-40 |
| Number of Connections | 1 |
| Number of Positions | 25 |
| Tightening torque | 0.2 Nm |
| Insertion/withdrawal cycles | > 200 |
| Pitch | 2.77 mm |
Notes
| Notes on operation | No additional touch protection is required when using a SELV/PELV voltage (≤30 V AC or 60 V DC). |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Accessories
Why Proax for Phoenix Contact 2926153?
Proax is an authorized distributor of Phoenix Contact 2926153 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
