2907713
Official DistributorSKU
PHX2907713
MPN
ETD-BL-2T-I-230
Weight
0.081 kg
This product is Not Cancellable/Not Returnable
Series ETD-BL
ETD-BL-2T-I-230 - Timer relay
Compact impulse encoder with adjustable pulse and pause times (50 ms - 100 h), wide range power supply unit, with screw connection, 1 changeover contact
- Time ranges from a few milliseconds to several days
- 2 floating changeover contact outputs
Technical Specifications
Product properties
| Operating mode | 100% operating factor |
| Mechanical service life | approx. 2x 10⁷ cycles |
Insulation characteristics
| Insulation | Basic insulation |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Service life electrical | approx. 2x 105 cycles at ohmic load, 1000 VA |
| Nominal frequency | 48 Hz ... 63 Hz |
| Nominal Power Consumption | 2.5 VA (1 W) |
| Test voltage relay winding/relay contact | 4 kV |
| Rated Insulation Voltage | 300 V |
Input data
| Nominal Power Consumption | 2.5 VA (1 W) |
| Input voltage range | 24 V AC/DC ... 240 V AC/DC -10 % ... +15 % |
| Temperature coefficient, typical | ≤ 0.01 %/K |
| Recovery time | 500 ms |
| Function | lp: Switched-mode beginning with the pause |
| Function | li: Switched-mode beginning with the pulse |
| Setting range time | 50 ms ... 100 h (7 time end ranges) |
| Basic accuracy | ± 1 % (of scale end value) |
| Setting accuracy | ≤ 5 % (of scale end value) |
| Repeat accuracy | ≤ 0.5 % ±5 ms |
Control
| Connection name | Non-floating, terminals A1-B1 |
| Control pulse length | ≥ 50 ms (DC) |
| Control pulse length | ≥ 100 ms (AC) |
Switching
| Contact switching type | 1 floating changeover contact |
| Maximum Switching Voltage | 250 V AC (in acc. with IEC 60664-1) |
| Interrupting rating (ohmic load) max. | 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing) |
| Interrupting rating (ohmic load) max. | 1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing) |
| Output fuse | 5 A (fast-blow) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Conductor cross section rigid | 0.5 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.5 mm² ... 2.5 mm² |
| Conductor cross section AWG | 20 ... 14 |
| Tightening torque | 1 Nm ... 1 Nm |
Signaling
| Status display | Green LED (POWER) |
| Status display | Yellow LED (relay active) |
Dimensions
| Width | 17.5 mm |
| Height | 89.5 mm |
| Depth | 65.5 mm |
Material specifications
| Color | gray (RAL 7042) |
| Flammability rating according to UL 94 | V0 |
Ambient conditions
| Degree of protection (Housing) | IP40 (Housing) |
| Degree of protection (Connection terminal blocks) | IP20 (Connection terminal blocks) |
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Ambient Temperature (Operation) | -25 °C ... 40 °C (corresponds to UL 508) |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Permissible humidity (operation) | 15 % ... 85 % |
CE
| Certificate | CE-compliant |
UKCA
| Certificate | UKCA-compliant |
EMC data
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Noise immunity | EN 61000-6-2 |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Standards and Regulations
| Standards/regulations | EN 50178 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | on standard DIN rail NS 35 in accordance with EN 60715 |
| Mounting Position | any |
Why Proax for Phoenix Contact 2907713?
Proax is an authorized distributor of Phoenix Contact 2907713 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
ETD-BL-1T-F-300MIN, Compact timer relay in 6.2 mm housing for controlling time sequences.The time is set on the front of the device using a labeled thumbwheel, which is recessed to protect against accidental modification. A screwdriver is used to change the settings (blade width 2.5 mm).The compact timer relays are available with different time ranges as well as with a screw, spring-cage, and push-in connection.
ETD-BL-1T-F-300MIN-PT, Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.1 s - 10 s), with push-in connection
Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.1 s - 10 s), with spring-cage connection
ETD-BL-1T-F-300S, Compact timer relay in 6.2 mm housing for controlling time sequences.The time is set on the front of the device using a labeled thumbwheel, which is recessed to protect against accidental modification. A screwdriver is used to change the settings (blade width 2.5 mm).The compact timer relays are available with different time ranges as well as with a screw, spring-cage, and push-in connection.
ETD-BL-1T-F-300S-PT, Timer relay with flasher function (beginning with pulse) and an adjustable time range (3 s - 300 s), with push-in connection- Timer relay with flasher function (beginning with pulse) and an adjustable time range (3 s - 300 s), with spring-cage connection
ETD-BL-1T-F- 30MIN, Compact timer relay in 6.2 mm housing for controlling time sequences.The time is set on the front of the device using a labeled thumbwheel, which is recessed to protect against accidental modification. A screwdriver is used to change the settings (blade width 2.5 mm).The compact timer relays are available with different time ranges as well as with a screw, spring-cage, and push-in connection.
ETD-BL-1T-F- 30MIN-PT, Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.3 min - 30 min), with push-in connection- Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.3 min - 30 min), with spring-cage connection
ETD-BL-1T-F- 10S, Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.1 s - 10 s), with screw connection- Timer relay with flasher function (beginning with pulse) and an adjustable time range (0.1 s - 10 s), with spring-cage connection
Timer relay with off delay (with control contact) and an adjustable time range (3 min - 300 min), with spring-cage connection
ETD-BL-1T-OFF-CC-300S, Timer relay with off delay (with control contact) and an adjustable time range (3 s - 300 s), with screw connection
ETD-BL-1T-OFF-CC-300S-PT, Timer relay with switch-off delay (with control contact) and an adjustable time range (3 s - 300 s), with push-in connection- Timer relay with off delay (with control contact) and an adjustable time range (3 s - 300 s), with spring-cage connection
ETD-BL-1T-OFF-CC- 30MIN, Timer relay with off delay (with control contact) and an adjustable time range (0.3 min - 30 min), with screw connection- Timer relay with off delay (with control contact) and an adjustable time range (0.3 min - 30 min), with spring-cage connection
ETD-BL-1T-OFF-CC- 10S-PT, Timer relay with switch-off delay (with control contact) and an adjustable time range (0.1 s - 10 s), with push-in connection- Timer relay with off delay (with control contact) and an adjustable time range (0.1 s - 10 s), with spring-cage connection
