Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
M23-17P1N8A8002S
Weight
0.096 kg
Series M23

M23-17P1N8A8002S - Cable connector

M23, Cable connector, series: M23 PRO, straight, shielded: yes, ONECLICK fast locking system, No. of pos.: 17, Direction of rotation: Standard, contact connection type: Pin, Crimp connection, cable diameter range: 4 mm ... 8.5 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %)

  • ONECLICK fast locking system with an optically, haptically, and acoustically clear locking position
  • Solutions with cross-manufacturer compatibility for standard and fast locking systems
  • Reliable under the harshest conditions: cable connectors with vibration brake
  • Modern, consistent design for highly convenient operation
  • Easy, cost-effective cable assembly: uniform shielding of M17 to M40
  • Safe use in the field, thanks to high degree of protection
Technical Specifications

Notes

Notes on operationPlease observe the derating curve.
Order information:Order 17 x 1 mm crimp contacts separately

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• Only use tools recommended by Phoenix Contact
Safety note• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
Safety note• Operate the connector only when it is fully plugged in and interlocked.
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Insulating body

CodingN
Insulation body materialPA 6.6
Insertion/withdrawal cycles100
Connection MethodCrimp connection
Contact switching typePin
ApplicationSignal
Number of Positions17
Direction of rotationStandard
Connection profile17
Contact diameter Signal contacts1 mm
Litz wire cross-section Signal contacts min.0.08 mm²
Litz wire cross-section Signal contacts max.1 mm²
Nominal current per signal contact8 A
Notefor max. connection cross section
Rated voltage Signal contact125 V
Rated surge voltage2 kV
Overvoltage categoryIII
Degree of pollution3
Installation height2000 m

Housing

Housing MaterialGD-Zn
Type of lockingONECLICK fast locking system
Pg screw connectionnone
Degree of protection (plugged in)IP66 / IP68 (2m / 24h) / IP69K
Thread typeM23

Seal

External Cable Diameter4 mm ... 8.5 mm
Seal materialFKM

Ambient conditions

Degree of ProtectionIP68
Ambient Temperature (Operation)-40 °C ... 105 °C (see to derating)
Permanent temperature125 °C (DIN EN 60512-9-2 / 1000 h)
Accessories

Why Proax for Phoenix Contact 1629155?

Proax is an authorized distributor of Phoenix Contact 1629155 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability