Official DistributorSKU
MPN
SACC-DSIV-M12MSB-5CON-L180 SH
Weight
0.012 kg
Series SACC-DSIV-M
SACC-DSIV-M12MSB-5CON-L180 SH - Device connector rear mounting
Sensor/actuator flush-type plug, 5-pos., M12, shielded, B-coded, rear/screw mounting with M12 thread, with straight solder connection
- Standard pin assignments and codings for signal transmission with a uniform design-in design
Technical Specifications
Notes
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Mounting
| Mounting Type | Rear mounting M12 x 1 With locking nut |
| Assembly instructions | With locking nut |
Product properties
| Number of Positions | 5 |
| Shielded | yes |
| Coding | B |
| Thread type | M12 |
Insulation characteristics
| Overvoltage category | II |
| Degree of pollution | 3 |
Material specifications
| Flammability rating according to UL 94 | HB |
| Seal material | NBR |
| Contact Material | CuZn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Brass, nickel-plated |
Electrical properties
| Rated surge voltage | 1.5 kV |
| Contact resistance | ≤ 5 mΩ |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 60 V |
| Nominal current IN | 4 A |
Conductor connection
| Connection Method | Solder pins |
| Contact connection type | Pin |
| Tightening torque | 1 Nm ... 1.5 Nm (Installation-side) |
Mechanical data
| Insertion/withdrawal cycles | > 100 |
Connection 1
| Head design | Pin |
| Head cable outlet | straight |
| Head thread type | M12 |
| Coding | B |
Cable/line
| Ambient Temperature (Operation) | -40 °C ... 85 °C (cable, fixed installation) |
| Ambient Temperature (Operation) | -25 °C ... 85 °C (Cable, flexible installation) |
Ambient conditions
| Degree of Protection | IP67 |
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -25 °C ... 85 °C (Plug / socket) |
| Ambient Temperature (Operation) | -40 °C ... 85 °C (without mechanical actuation) |
| Ambient Temperature (Operation) | -25 °C ... 85 °C (Cable, flexible installation) |
| Ambient Temperature (Operation) | -40 °C ... 85 °C (cable, fixed installation) |
M12
| Standard designation | M12 connector |
| Standards/specifications | IEC 61076-2-101 |
Accessories
Why Proax for Phoenix Contact 1437203?
Proax is an authorized distributor of Phoenix Contact 1437203 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 60 |
Recommended
1527867 - Device connector rear mounting, 5-position, Pin, angled, M12, coding: B, Rear mounting, M12 x 1, Wave soldering
1514883 - Sensor/Actuator flush-type plug, 5-pos., M12, B-coded, rear/screw mounting with M12 thread, with straight solder connection- 1528206 - Device connector rear mounting, 5-position, Pin, straight, M12, coding: B, Rear mounting, Pg9, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239904
1434866 - Bus system flush-type connector, Ethernet, 4-pos., M12, shielded, D-coded, rear/screw mounting, with angled solder connection
1694224 - Device connector rear mounting, 5-position, Pin, angled, M12, coding: A, Rear mounting, M12 x 1, Wave soldering- 1440054 - Device connector rear mounting, 5-position, Pin, angled, M12, coding: A, Rear mounting, M12 x 1, Wave soldering
1694211 - Sensor/actuator flush-type plug, 5-pos., M12, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection- 1437193 - Sensor/actuator flush-type plug, 5-pos., M12, shielded, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection
1528183 - Device connector rear mounting, 5-position, Pin, straight, M12, coding: A, Rear mounting, Pg9, Wave soldering, cable gland Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239902
1527870 - Device connector rear mounting, 5-position, Socket, angled, M12, coding: B, Rear mounting, M12 x 1, Wave soldering
1515934 - Sensor/Actuator flush-type socket, 5-pos., M12, B-coded, rear/screw mounting with M12 thread, with straight solder connection- 1437180 - Sensor/actuator flush-type connector, socket, 5-pos., M12, shielded, B-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection
1528196 - Device connector rear mounting, 5-position, Socket, straight, M12, coding: B, Rear mounting, Pg9, Solder pins, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239903
1534627 - Bus system flush-type socket, Ethernet, 4-pos., M12, shielded, D-coded, rear/screw mounting, with straight solder connection
1534630 - Device connector rear mounting, 4-position, Socket, angled, M12, coding: D, Rear mounting, M12 x 1, Wave soldering
1528154 - Device connector rear mounting, 4-position, Socket, straight, M12, coding: A, Rear mounting, Pg9, Wave soldering, cable gland Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239899
1694240 - Device connector rear mounting, 5-position, Socket, angled, M12, coding: A, Rear mounting, M12 x 1, Wave soldering- 1440067 - Device connector rear mounting, 5-position, Socket, angled, M12, coding: A, Rear mounting, M12 x 1, Wave soldering
1694237 - Sensor/actuator flush-type socket, 5-pos., M12, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection- 1528167 - Device connector rear mounting, 5-position, Socket, straight, M12, coding: A, Rear mounting, Pg9, Wave soldering, cable gland Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239900