Proax
CADEN
proax logo
Cart

1409237

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX1409237
MPN
PRC COVER M
Weight
0.004 kg

PRC COVER M - Protective cap

Protective cap, Range of articles: PRC 35, housing material: PPE, color: black, rated voltage: 1000, Suitable for connectors (MS)

  • Reliable protection against environmental influences when not plugged in
  • Ideal for indoor and outdoor use due to weatherproof materials
  • Suitable for applications in atmospheres containing salt and in direct sunlight
Technical Specifications

Notes

Notes on operationSuitable for connectors (MS)

Safety note

Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product
Safety note• Only use tools recommended by Phoenix Contact
Safety note• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
Safety note• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
Safety note• Operate the connector only when it is fully plugged in.
Safety note• Operate the connector only when it is fully plugged in and interlocked.
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product properties

Product familyPRC 35

Insulation characteristics

Protection classII
Degree of pollution2

Electrical properties

Nominal voltage ATD1000 (III/2.00) DIN VDE 60664-1
Nominal voltage ATD600 V AC / DC (III/2.00) in accordance with UL 2238 / UL 2237
Nominal voltage ATD500 V AC / DC (III/2.00) in accordance with IEC 61535, when mounted

Dimensions

Width37.8 mm
Height20.8 mm
Length26.4 mm

Material specifications

Colorblack
Color of the housing partblack
Flammability rating according to UL 94V0
Housing MaterialPPE

Ambient conditions

Degree of protection (when plugged in)IP66 / IP68 (2m / 24h)
Degree of ProtectionIP66 / IP68 (2m / 24h)
Degree of ProtectionIP66 / IP68 (2 m / 24 h)
Ambient Temperature (Operation)-40 °C ... 105 °C
Ambient temperature (assembly)5 °C ... 85 °C

Why Proax for Phoenix Contact 1409237?

Proax is an authorized distributor of Phoenix Contact 1409237 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size50
Sold in quantities of 50

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability