DGM85R-AZMC
Official DistributorSKU
ORIDGM85RAZMC
Weight
1 kg
Hollow Rotary Actuator
The DGII Series uses a highly rigid hollow rotary table with an absolute mechanical encoder AZ series closed loop motor allowing for highly accurate positioning of larger inertia loads.- Large-Diameter, Hollow Output Table
- Direct Coupling
- Accurate Positioning
- Shorter Positioning Time
- Easy Home Operation
Technical Specifications
| Frame Size | 3.35 in |
| Shaft | Single |
| Gear Ratio (X:1) | 18 :1 |
| Motor Location | Vertical Mount |
| Cable Direction | Down |
| Electromagnetic Brake | Equipped |
| Output Table Supporting Bearing | Cross-Roller Bearing |
| Permissible Torque | 39.80 lb-in |
| Inertia | 26304x10-7 kg·m² |
| Permissible Speed (r/min) | 1200º/seconds (200 r/min) |
| Max. Holding Torque | 23.90 lb-in |
| Resolution | 36000 P/R (0.01º) |
| Repetitive Positioning Accuracy (arc sec) | ±15 arc sec (±0.004º) |
| Lost Motion | 2 arc minute (0.033°) |
| Angular Transmission Accuracy | 4 arc minute (0.067º) |
| Permissible Thrust Load | 500 N |
| Permissible Moment Load | 10 N·m |
| Runout of Output Table Surface | 0.015 mm |
| Runout of Output Table Inner (Outer) Diameter | 0.015 mm |
| Parallelism of Output Table | 0.03 mm |
| Degree of Protection | Actuator: IP40 (IP20 for motor connector) |
| Insulation Class | 130 (B) [Recognized as 105 (A) by the UL Standards] |
| Insulation Resistance (Actuator) | 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings, Case - Electromagnetic Brake Windings |
| Dielectric Strength (Actuator) | Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 HzCase - Electromagnetic Brake Windings 1.5 kVAC, 50 Hz or 60 Hz |
| Ambient Temperature (Actuator) | 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Operating Atmosphere | Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
| Safety Standards | UL |
| RoHS Compliant | This product does not contain substances that exceed the regulation values in the RoHS Directive |
| Power Supply | AC Input |
Why Proax for Oriental Motor DGM85R-AZMC?
Proax is the authorized distributor of Oriental Motor DGM85R-AZMC. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | DGM85RAZMC |
| Pack Size | 1 |
Recommended
