Official DistributorSKU
MPN
CN-UB-70DC-6-BB
Weight
0.076 kg
This product is Not Cancellable/Not Returnable
Series CN-UB
CN-UB-70DC-6-BB - Surge protection device
Attachment plug with surge protection for coaxial signal interfaces. Connection: N connector, female/female
Technical Specifications
General
| Note | To meet the discharge conditions for DC voltages, please note the following information: "The surge protective device should be used together with a transmitter unit, which shuts down in the event of a short-circuit." |
Product properties
| IEC test classification | C2 |
| IEC test classification | C3 |
| IEC test classification | D1 |
| VDE requirement class | C2 |
| VDE requirement class | C3 |
| VDE requirement class | D1 |
| Type | Attachment plug |
| Surge protection fault message | none |
Connection data
| Connection Method | N connector 50 Ω |
Dimensions
| Width | 24 mm |
| Height | 24 mm |
| Depth | 47 mm |
Material specifications
| Color | Nickel |
| Seal material | Silicon |
| Housing Material | Brass (CuZn) |
| Housing surface material | Nickel |
| Inner conductor material | BeCu |
| Inner conductor surface material | Gold |
| Insulation body material | PTFE |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | Line-Shield/Earth Ground |
| Maximum continuous voltage UC | 70 V DC |
| Maximum continuous voltage UC | 50 V AC |
| Maximum continuous voltage UC (line-earth) | 70 V DC |
| Maximum continuous voltage UC (line-earth) | 50 V AC |
| Rated current | 10 A |
| Operating effective current IC at UC | ≤ 1 µA |
| Nominal discharge current In (8/20) µs | 5 kA |
| Nominal discharge current In (8/20) µs (line-ground) | 5 kA |
| Nominal discharge current In (8/20) µs (line-shield) | 5 kA |
| Pulse discharge current Iimp (10/350) µs | 1 kA |
| Pulse discharge current Iimp (10/350) µs (line-earth) | 1 kA |
| Max. discharge current Imax (8/20) µs maximum (line-earth) | 10 kA |
| Max. discharge current Imax (8/20) µs maximum (line-shield) | 10 kA |
| Nominal pulse current Ian (10/1000) µs (line-shield) | 100 A |
| Impulse discharge current (10/350) µs, peak value limp | 1 kA |
| Output voltage limitation at 1 kV/µs (line-earth) spike | ≤ 650 V |
| Output voltage limitation at 1 kV/µs (line-shield) spike | ≤ 650 V |
| Output voltage limitation at 1 kV/µs (line-earth) static | ≤ 650 V |
| Output voltage limitation at 1 kV/µs (line-shield) static | ≤ 650 V |
| Voltage protection level Up (line-earth) | ≤ 800 V (C2 - 4 kV / 2 kA) |
| Voltage protection level Up (line-earth) | ≤ 1 kV (C2 - 10 kV / 5 kA) |
| Voltage protection level Up (line-shield) | ≤ 800 V (C2 - 4 kV / 2 kA) |
| Voltage protection level Up (line-shield) | ≤ 1 kV (C2 - 10 kV / 5 kA) |
| Response time tA (line-earth) | ≤ 100 ns |
| Response time tA (line-shield) | ≤ 100 ns |
| Input attenuation aE, asym. | 0.1 dB (≤ 6 GHz) |
| Cut-off frequency fg (3 dB), asym. (shield) in 50 Ω system | > 6 GHz |
| Frequency Range | 0 Hz ... 6 GHz |
| Voltage standing wave ratio VSWR in a 50 Ω system | typ. 1.15 (≤ 6 GHz) |
| Permissible HF power Pmax at VSWR = xx (50 ohm system) | 30 W (VSWR = 1.15) |
| Capacity (core-earth) | typ. 1.5 pF |
| Capacity asymmetrical (shield) | typ. 1.5 pF |
| Surge protection fault message | none |
| Impulse durability (line-earth) | C2 - 10 kV / 5 kA |
| Impulse durability (line-earth) | C3 - 100 A |
| Impulse durability (line-earth) | D1 - 1 kA |
| Impulse durability (line-shield) | C2 - 10 kV/5 kA |
| Impulse durability (line-shield) | C3 - 100 A |
| Impulse durability (line-shield) | D1 - 1 kA |
| Alternating current carrying capacity (line-shield) | 5 A - 1 s |
Ambient conditions
| Degree of Protection | IP68 |
| Ambient Temperature (Operation) | -40 °C ... 90 °C |
Standards and Regulations
| VDE requirement class | C2 |
| VDE requirement class | C3 |
| VDE requirement class | D1 |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 |
Standards Information technology specification
| Standards/regulations | IEC 61643-21 |
| Standards/regulations | IEC 61643-21 |
| Standards/specifications | IEC 61643-21 |
| Note | 2000 |
Mounting
| Mounting Type | Connection-specific intermediate plugging |
| Assembly instructions | Outdoors and indoors |
Accessories
Why Proax for Phoenix Contact 2803166?
Proax is an authorized distributor of Phoenix Contact 2803166 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2803153 - Attachment plug with surge protection for coaxial signal interfaces. Connection: N connector, male/female
2801050 - Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector socket/socket
2801051 - Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector plug/socket
2818850 - Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector socket/socket
2818148 - Attachment plug with replaceable surge protection for coaxial signal interfaces. Connection: N connector plug/socket
2817686 - Attachment plug with surge protection, for coaxial signal interfaces with floating shield. Connection: N connector socket-socket
2763691 - Attachment plug with surge protection, for coaxial signal interfaces with floating shield. Connection: N connector socket/plug
