Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
IL ETH BK DI8 DO4 2TX-XC-PAC
Weight
0.349 kg
This product is Not Cancellable/Not Returnable

IL ETH BK DI8 DO4 2TX-XC-PAC - Bus coupler

Inline, Bus coupler, Modbus/TCP(UDP), RJ45 jack, Digital inputs: 8, 24 V DC, connection technology: 3-conductor, Digital outputs: 4, 24 V DC, 500 mA, connection technology: 3-conductor, Extreme conditions version, transmission speed in the local bus: 500 kbps / 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields

  • 2 Ethernet ports (with integrated switch)
  • Auto negotiation
  • Autocrossing
  • Transmission speed of 10 Mbps and 100 Mbps
  • Automatic detection of the transmission speed in the local bus (500 kbps or 2 Mbps)
  • 8 digital inputs, 4 digital outputs (on-board)
  • Data exchange via OPC server supported
  • Software interfaces for access via TCP/IP: Device Driver Interface (DDI) and High-Level Language Fieldbus Interface (HFI)
  • Web-based management
  • Can be used under extreme ambient conditions
  • Extended temperature range of -40 °C ... +70 °C (see “Tested successfully: use under extreme ambient conditions” in the data sheet)
  • Coated PCBs
Technical Specifications

Dimensions

Width80 mm
Height119.8 mm
Depth71.5 mm
Note on dimensionsSpecfications with connectors

Modbus/TCP (UDP)

Number of interfaces2
Connection MethodRJ45 jack
Note on the connection methodAuto negotiation and autocrossing
Transmission Speed10/100 Mbps
Transmission physicsEthernet in RJ45 twisted pair

Inline local bus

Number of interfaces1
Connection MethodInline data jumper
Transmission Speed500 kbps / 2 Mbps (automatic detection, no combined system)

Fieldbus: Local bus gateway

Max. number of local bus devices61 (The on-board I/Os are two devices)

System limits

Number of supported devicesmax. 63 (per station)
Number of local bus devices that can be connectedmax. 61 (The on-board I/Os are two devices)
Number of devices with parameter channelmax. 16
Number of supported branch terminals with remote bus branch0

Module

ID code (hex)none
Input address area8 bit
Output address area4 bit
Register length16 bit

Digital:

Input nameDigital inputs
Description of the inputEN 61131-2 type 1
Number of Inputs8
Connection MethodInline connector
Connection technology3-conductor
Input Voltage24 V DC
Input voltage range "0" signal-30 V DC ... 5 V DC
Input voltage range "1" signal15 V DC ... 30 V DC
Nominal input voltage UIN24 V DC
Nominal input current at UINtyp. 3 mA
Typical input current per channeltyp. 3 mA
Typical response timeapprox. 500 µs
Delay at signal change from 0 to 11.2 ms
Delay at signal change from 1 to 01.2 ms
Protective circuitReverse polarity protection; Suppressor diode
Output nameDigital outputs
Connection MethodInline connector
Connection technology3-conductor
Number of Outputs4
Protective circuitShort-circuit and overload protection; Freewheeling circuit in the output driver
Output Voltage24 V DC -1 V (At nominal current)
Maximum Output Current per modulemax. 2 A
Nominal Output Voltage24 V DC
Output current when switched offmax. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)
Nominal load, inductive12 VA (1.2 H, 48 Ω)
Nominal load, lamp12 W
Nominal load, ohmic12 W
Reverse voltage resistance to short pulsesReverse voltage proof
Behavior with overloadAuto restart
Behavior with inductive overloadOutput can be destroyed
Behavior at voltage switch-offThe output follows the power supply without delay
Signal delaytyp. 1.2 ms
Overcurrent shut-downmin. 0.7 A

Product properties

Product familyInline
Typemodular
Scope of deliveryincluding Inline connectors and marking fields
No. of channels12
Special PropertiesExtreme conditions version
Diagnostics messagesShort-circuit or overload of the digital outputs yes
Diagnostics messagesSensor supply failure yes
Diagnostics messagesFailure of the actuator supply yes

Potentials

Power consumptiontyp. 3 W (entire device)
Protective circuitSurge protection (segment supply, main supply, bus coupler supply); Suppressor diode, 35 V DC
Protective circuitReverse polarity protection (segment supply, main supply, bus coupler supply); Suppressor diode, 35 V DC

Supply Voltage24 V DC (via Inline connector)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 0.98 A (with max. number of connected I/O terminal blocks)
Current drawmin. 80 mA (without connected I/O terminal blocks)

Potentials: Communications power (UL)

Supply Voltage7.5 V DC

Potentials: Supply of analog modules (UANA)

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)

Potentials: Main circuit supply (UM)

Supply Voltage24 V DC (via Inline connector)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 8 A DC
Current drawmin. 3 mA (without connected peripherals)

Potentials: Segment circuit supply (US)

Supply Voltage24 V DC (via Inline connector)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 8 A DC
Current drawmin. 3 mA (without connected peripherals)

Connection technology

Connection nameInline connector

Conductor connection

Connection MethodSpring-cage connection
Conductor cross section rigid0.08 mm² ... 1.5 mm²
Conductor cross section flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Inline connector

Connection MethodSpring-cage connection
Conductor cross section, rigid0.08 mm² ... 1.5 mm²
Conductor cross section, flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 55 °C (Standard)
Ambient Temperature (Operation)-40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeDIN rail mounting
Accessories

Why Proax for Phoenix Contact 2701388?

Proax is an authorized distributor of Phoenix Contact 2701388 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability