2298331
Official DistributorSKU
PHX2298331
MPN
UM 25-PVB 2/12ICV/SO19
Weight
0.062 kg
Series UM
UM 25-PVB 2/12ICV/SO19 - Potential distributors
VARIOFACE module, with COMBICON connectors and two potentials (+ -) for potential distribution, for mounting on NS 35/7.5 or NS 32
Technical Specifications
Notes
| Notes on operation | The necessary requirements for insulation (basic insulation or reinforced insulation) from adjacent modules (in DIN-rail direction) must be realized by applying suitable measures (e. g., partition plates). |
| Notes on operation | Ensure that the supply voltage of the device has a common reference potential. |
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Product properties
| Product family | VARIOFACE |
Insulation characteristics
| Insulation | Functional insulation |
| Insulation | Functional insulation |
| Pollution degree | 2 |
Electrical properties
| Nominal voltage UN | 230 V AC/DC |
| Max. total current of all branches | 12 A |
| Rated Insulation Voltage | 230 V |
| Rated surge voltage | 2.1 kV (1.2/50 μs) |
Service Entrance
| Number of Connections | 2 |
| Pitch | 5.08 mm |
Distribution
| Number of Connections | 12 |
Dimensions
| Width | 25 mm |
| Height | 97 mm |
| Depth | 42 mm |
Ambient conditions
| Degree of Protection | IP00 |
| Degree of protection (Installation location) | ≥ IP54 (Installation location) |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Altitude | ≤ 2000 m |
Standards and Regulations
| Standards/regulations | EN 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2298331?
Proax is an authorized distributor of Phoenix Contact 2298331 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
UM 25-PROFIL 100CM - Press-drawn section housings, Basic profile, length: 1000 mm, Note: required profile length = PCB length - 3 mm
UM 25-SEK - Side element, with cable fixture, 6 mm wide, cables fixed with cable ties, these are not included in the scope of delivery.
UM 25-SES - Side element, with marker groove, labeling with SS-ZB. Width: 11 mm, length: 25 mm, height: 21 mm
UM 25-FLK20/FRONT/Q - VARIOFACE SLIM LINE, with screw connection and flat-ribbon cable connector, for assembly at a right angle on NS 35/7.5, 20 positions
UM 25-D25SUB/B/FRONT/Q - VARIOFACE SLIM LINE, with screw connection and D-subminiature socket strip, for assembly at a right angle on NS 35/7.5, 25 positions
UM 25-D25SUB/S/FRONT/Q - VARIOFACE SLIM LINE, with screw connection and D-subminiature pin strip, for assembly at a right angle on NS 35/7.5, 25 positions
UM 25-D15SUB/B/FRONT/Q - VARIOFACE SLIM LINE, with screw connection and D-subminiature socket strip, for assembly at a right angle on NS 35/7.5, 15 positions
UM 25-D15SUB/S/FRONT/Q - VARIOFACE SLIM LINE, with screw connection and D-subminiature pin strip, for assembly at a right angle on NS 35/7.5, 15 positions
VARIOFACE SLIM LINE, with screw connection and D-subminiature socket strip, for assembly at a right angle on NS 35/7.5, 9 positions
VARIOFACE SLIM LINE, with screw connection and D-subminiature pin strip, for assembly at a right angle on NS 35/7.5, 9 positions