Official DistributorSKU
MPN
HC-B 10-EBUS
Weight
0.083 kg
Series HC-B
HC-B 10-EBUS - Contact insert
HEAVYCON female insert, B10 series, 10-pos., screw connection
Technical Specifications
Notes
| General | For housing HC-B10 |
Mounting
| Assembly instructions | Connectors may be operated only when there is no load/voltage. |
| Assembly instructions | For housings of type B10. |
Product properties
| Type | B10 |
| Number of Positions | 10 |
| Connection profile | 10+PE |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Dimensions
| Width | 34 mm |
| Height | 37 mm |
| Length | 64 mm |
Connection technology
| Connection technology | Screw connection |
| Connection in acc. with standard | IEC / EN |
Conductor connection
| Conductor Cross Section | 0.5 mm² ... 2.5 mm² (applies to stranded conductors with ferrules) |
| Conductor Cross Section | 0.5 mm² ... 4 mm² (PE screw) |
| Connection cross section AWG | 20 ... 14 |
| Connection cross section AWG | 20 ... 12 (PE screw) |
| Tightening torque | 0.5 Nm |
| Stripping length of the individual wire | 7 mm |
Electrical properties
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
Mechanical data
| Insertion/withdrawal cycles | ≥ 500 |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact Material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 125 °C (including heating up of contacts) |
Standards and Regulations
| Constructional and testing regulations | DIN VDE 0627/86 |
| Constructional and testing regulations | DIN VDE 0110/02.79 |
| Constructional and testing regulations | DIN VDE 0110-1/04.97 |
| Constructional and testing regulations | IEC 60664-1, DIN IEC 60512 |
| Constructional and testing regulations | IEC 60352 |
| Tests | DIN VDE 0627/86 |
| Tests | DIN VDE 0110/02.79 |
| Tests | DIN VDE 0110-1/04.97 |
| Tests | IEC 60664-1, DIN IEC 60512 |
| Tests | IEC 60352 |
Why Proax for Phoenix Contact 1771202?
Proax is an authorized distributor of Phoenix Contact 1771202 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1605569 - Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 1, Socket, QUICKON connection, 500 V, 16 A, 0.34 mm2 ... 2.5 mm2
1605624 - Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 1, Pin, QUICKON connection, 500 V, 16 A, 0.34 mm2 ... 2.5 mm2
1775509 - D-SUB adapter plate, for two D-SUB connectors, no. of positions 25, housing series HC-B 10...
1775499 - D-SUB adapter plate, for one D-SUB connector, no. of positions 25, housing series HC-B 10...
1771341 - HEAVYCON B10 panel mounting base, for double locking latch, height: 29 mm, with plastic cover, with flat gasket
1771325 - HEAVYCON B10 panel mounting base, with double locking latch, height: 29 mm, with flat gasket
1604984 - HEAVYCON B10; with double locking latch made of sheet steel (not divided); height 27 mm, with flat gasket
1642522 - HEAVYCON panel mounting base B10, with double locking latch, EMC version. Not suitable for D series terminal adapters
1771354 - HEAVYCON B10 panel mounting base, with single locking latch, height: 29 mm, with plastic cover, with flat gasket
1645477 - Panel mounting base B10, with single locking latch, material: die-cast aluminum, protective cover material: Al, height: 29 mm, cable gland: none, protective cover: yes, Standard, with flat gasket
