Official DistributorSKU
MPN
HC-B 10-A-UT-PER-M
Weight
0.107 kg
This product is Not Cancellable/Not Returnable
Series HC-B
HC-B 10-A-UT-PER-M - Terminal adapter
HEAVYCON terminal adapter, pin insert, B10 series, 10-pos., for the right side of the control cabinet, screw connection.
Technical Specifications
Notes
| General | For HEAVYCON-ADVANCE mounting flange and HEAVYCON panel mounting base of B10 type |
| General | Connectors may be operated only when there is no load/voltage. |
Product properties
| Product family | HC-B |
| Series | HC-B |
| Type | B10 |
| Number of Positions | 10 |
| Connection profile | 10+PE |
| Contact numbering | 1 - 10 |
| Type | for the right side of the control cabinet |
| Screwdriver blade | 0.5 x 3.5 mm |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical properties
| Rated voltage (III/3) | 500 V |
| Rated surge voltage | 6 kV |
| Rated current | 16 A |
| SCCR | 5 kA (UL 2237) |
Connection technology
| Connection technology | Screw connection |
| Connection in acc. with standard | IEC / EN |
Conductor connection
| Conductor Cross Section | 0.5 mm² ... 2.5 mm² |
| Connection cross section AWG | 20 ... 14 |
| Tightening torque | 0.5 Nm ... 0.8 Nm |
| Stripping length of the individual wire | 12 mm |
Dimensions
| Width | 34 mm |
| Height | 71.6 mm |
| Length | 64 mm |
| Drill hole distance, horizontal | 57 mm |
| Drill hole distance, vertical | 27 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact Material | Copper alloy |
| Contact surface material | Ag |
| Contact carrier material | PA |
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Cable/line
| Stripping length of the individual wire | 12 mm |
Mechanical data
| Insertion/withdrawal cycles | ≥ 500 |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 125 °C |
Standards and Regulations
| Constructional and testing regulations | DIN EN 61984 |
| Constructional and testing regulations | DIN EN 60664 |
| Constructional and testing regulations | IEC 60352 |
| Tests | DIN EN 61984 |
| Tests | DIN EN 60664 |
| Tests | IEC 60352 |
Testing
| Standards/regulations | PA: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Mounting
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Assembly instructions | Connectors may only be actuated when there is no load/voltage. |
Accessories
1772722 - Coding pin, prevents mismating of up to six connectors with an identical number of positions
Why Proax for Phoenix Contact 1648084?
Proax is an authorized distributor of Phoenix Contact 1648084 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 5 |
Recommended
Adaptateur pour module HEAVYCONNEC, isolant femelle, série B10, 10 pôles, pour le côté droit de l'armoire électrique, raccordement vissé
1775499 - D-SUB adapter plate, for one D-SUB connector, no. of positions 25, housing series HC-B 10...
1775509 - D-SUB adapter plate, for two D-SUB connectors, no. of positions 25, housing series HC-B 10...
1771341 - HEAVYCON B10 panel mounting base, for double locking latch, height: 29 mm, with plastic cover, with flat gasket
1771325 - HEAVYCON B10 panel mounting base, with double locking latch, height: 29 mm, with flat gasket
1645477 - Panel mounting base B10, with single locking latch, material: die-cast aluminum, protective cover material: Al, height: 29 mm, cable gland: none, protective cover: yes, Standard, with flat gasket
1604984 - HEAVYCON B10; with double locking latch made of sheet steel (not divided); height 27 mm, with flat gasket
1642522 - HEAVYCON panel mounting base B10, with double locking latch, EMC version. Not suitable for D series terminal adapters
1771354 - HEAVYCON B10 panel mounting base, with single locking latch, height: 29 mm, with plastic cover, with flat gasket
1586125 - Docking frame for racks, for contact inserts of B10 type, with four M5 flat headed screws, rack balance x/y axis ±1.5 mm
1648173 - Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 1, Pin, Screw connection, 500 V, 16 A, 0.5 mm2 ... 2.5 mm2, application: Power
1648186 - Contact insert, number of positions: 10+PE, size: B10, number of connections per position: 1, Socket, Screw connection, 500 V, 16 A, 0.5 mm2 ... 2.5 mm2, application: Power
