Official DistributorSKU
MPN
Q 1,5/3A50/13-M20KU-ESA
Weight
0.057 kg
Series Q
Q 1,5/3A50/13-M20KU-ESA - Panel feed-through
QUICKON panel feed-through, for the front wall assembly with 50 cm long wires, 3-pos.
- Robust throughout: housing with IP65/IP67 protection for a wide range of applications
Technical Specifications
Product properties
| Number of Positions | 3 |
| Position marking | 1, 2, 3 |
| Number of Connections | 3 |
| Number of connections per position | 1 |
| Shielded | no |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Connection technology
| Connection method On the device side | Single wires |
| Frequency of connections between conductors of the same cross section | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
Conductor connection
| Conductor cross section flexibel | 0.75 mm² ... 1.5 mm² |
| Conductor cross section solid | 0.75 mm² ... 1 mm² |
| Connection cross section AWG | 18 ... 16 |
| Tightening torque Union nut | 2.5 Nm |
| Tightening torque contact carrier | 3.75 Nm |
| Tightening torque Locking nut | 3.75 Nm |
| Wrench size Union nut | 24 mm |
| Wrench size Contact carrier | 24 mm |
Pin assignment
| Contact | Color (signal designation) | Contact (optional) | 1 | BN |
| Contact | Color (signal designation) | Contact (optional) | 2 | WH |
| Contact | Color (signal designation) | Contact (optional) | 3 | BU |
Dimensions
| Width | 24 mm |
| Height | 24 mm |
| Length | 42.7 mm |
Electrical properties
| Rated surge voltage (III/3) | 6 kV |
| Contact resistance | < 3 mΩ |
| Rated voltage (II/2) | 630 V (with insulating sleeve) |
| Rated voltage (III/2) | 320 V (with insulating sleeve) |
| Rated voltage (III/3) | 250 V (with insulating sleeve) |
| Nominal voltage UN | 250 V AC |
| Nominal voltage UN | 250 V DC |
| Nominal current IN | 17.5 A |
Material specifications
| Color (Housing) | green (RAL 6021) |
| Material Housing | PA |
| Flammability rating according to UL 94 | V0 |
| Material wire insulation | PVC / PE |
| Contact Material | Copper alloy |
| Contact surface material | Pre-nickel plated and tin-plated |
| Contact carrier material | PA 6.6 |
Cable/line
| Cable Length | 0.5 m |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
| Wire diameter including insulation | >= 3 mm |
| Position marking | 1, 2, 3 |
| Cable cross section | 1.5 mm² |
Mounting
| Mounting Type | Front mounting M20 |
| Assembly instructions | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
Ambient conditions
| Degree of Protection | IP65 |
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -25 °C ... 80 °C (Specifications of the cable manufacturer must be observed.) |
| Ambient Temperature (Operation) | -25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) |
| Temperature when conductor connected | -5 °C ... 50 °C |
Accessories
MICROFOX-SB - Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter
PT/FS 4,8 - Insulating sleeve, as touch protection, for 4.8 mm slip-on sleeves, slide onto the conductor before
Why Proax for Phoenix Contact 1640731?
Proax is an authorized distributor of Phoenix Contact 1640731 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Q 1,5/3A50/13-13KU-ESA - QUICKON panel feed-through with wire exit 1.5 mm2 and 0.5 m litz wire: Connecting thread: Pg13,5, 3-pos.
Q 1,5/2A50/11-M20KU-ESA - Panel feed-through with wire exit 1.5 mm2 and 0.5 m Litz wire: connecting thread: M20, 2-pos.
Q 1,5/4A50/16-M25KU-ESA - Panel feed-through with wire exit 1.5 mm2 and 0.5 m Litz wire: connecting thread: M25, 4-pos.
Q 1,5/2A50/11-11KU-ESA - Panel feed-through with wire exit 1.5 mm2 and 0.5 m Litz wire, connecting thread: Pg11, 2-pos.
Q 1,5/4A50/24-M20KU-ESA-ASI BK - Panel feed-through with QUICKON fast connection technology, for accommodating one or two AS-i flat-ribbon conductors, on the rear side with four 0.5 m long individual wires 1.5 mm2
Q 1,5/4A50/24-M20KU-ESA-BK - Panel feed-through, with wire output 1.5 mm2 and 0.5 m litz wire: connecting thread: M20x1.5, 4-pos., black
Q 1,5/4A10/24-M20KU-ESA BK PE - Panel feed-through with wire exit 1.5 mm2 and 0.1 m litz wire: connecting thread: M20, 4-pos.
Q 1,5/3FL/13-13KU-ESA - QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 3-pos.
Q 1,5/3FL/13-M20KU-ESA - QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 3-pos.
Q 1,5/3FL/13-M20KU-ESA-BK - QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 3-pos.
Q 1,5/3FL/13-M20KU-ESA-BK LNPE - QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 3-pos.
Q 1,5/3L180/13KU-DSI, Panel feed-through, for internal wall mounting, with dip-solder connection, length of the solder pin: 3.8 mm, hole Ø 3-pos. = 20.8 mm - 0.3
Q 1,5/2FL/11-11KU-ESA - QUICKON panel feed-through, for external wall mounting with manual solder/slip-on connection, 4.8 x 0.8 mm, 2-pos.
