Proax
CADEN
proax logo
Cart

1607741

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX1607741
MPN
ST-7EP1N8A9003S
Weight
0.063 kg

ST-7EP1N8A9003S - Coupler connector

Coupler connector, straight, for standard and SPEEDCON interlock, M17, number of positions: 7+PE, contact connection type: Pin, shielded: yes, degree of protection: IP67, cable diameter range: 5 mm ... 8 mm, number of positions: 8, connection method: Crimp connection, series: ST, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1242358

  • Consistent EMC protection for reliable connection solutions in the industrial environment
  • Crimping connection: vibration- and temperature-resistant assembly
  • Flexible use: reliably connect various cable diameters
Technical Specifications

Notes

Order information:Order crimp contacts Ø 1 mm separately

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• Only use tools recommended by Phoenix Contact
Safety note• The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
Safety note• Operate the connector only when it is fully plugged in and interlocked.
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the minimum bending radius of the cable. Lay the cable without twisting it.
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Product properties

SeriesST
ApplicationPower
Number of Positions8
Connection profile7+PE
Shieldedyes
CodingN
Thread typeM17

Material specifications

Seal materialFPM
Housing MaterialMetal
Housing MaterialTurned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn)
Insulator MaterialPA 6.6
Gasket and O-ring materialFPM

Conductor connection

Connection MethodCrimp connection

Contact

Contact diameter1 mm
Max. current14 A
Nominal voltage UN630 V
Overvoltage categoryIII
Degree of pollution3
Rated surge voltage6 kV
Contact diameter1 mm

Connector

Typestraight
Direction of rotationStandard

Cable/line

External Cable Diameter5 mm ... 8 mm

Ambient conditions

Degree of ProtectionIP67
Ambient Temperature (Operation)-40 °C ... 125 °C
Ambient temperature (storage/transport)15 °C ... 25 °C
Altitude2000 m
Permissible humidity (storage/transport)50 % ... 65 %
Accessories

Why Proax for Phoenix Contact 1607741?

Proax is an authorized distributor of Phoenix Contact 1607741 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability