The figure shows the 24-pos. version
Official DistributorSKU
MPN
VC-AR3/4M-S6666-SET
Weight
0.057 kg
Series VC-AR
VC-AR3/4M-S6666-SET - Contact insert set
Contact insert set, Range of articles: VARIOCON, design: VC3, housing material: PA, number of positions: 24, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 250, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
Technical Specifications
Notes
| General | Connectors may only be connected/disconnected when under no load. |
Safety note
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Safety note | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| Safety note | • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. |
| Safety note | • The products are suitable for applications in plant, controller, and electrical device engineering. |
| Safety note | • When operating the connectors in outdoor applications, they must be separately protected against environmental influences. |
| Safety note | • Assembled products may not be manipulated or improperly opened. |
| Safety note | • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). |
| Safety note | • When using the product in direct connection with third-party manufacturers, the user is responsible. |
| Safety note | • For operating voltages > 50 V AC, conductive connector housings must be grounded |
| Safety note | • Ensure that the protective or functional ground has been properly connected. |
| Safety note | • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector |
| Safety note | • Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product |
| Safety note | • Only use tools recommended by Phoenix Contact |
| Safety note | • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. |
| Safety note | • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products |
| Safety note | • Operate the connector only when it is fully plugged in. |
| Safety note | • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. |
| Safety note | • Observe the minimum bending radius of the cable. Lay the cable without twisting it. |
| Safety note | • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). |
Product properties
| Product family | VARIOCON |
| Series | VC-D |
| Type | VC3 |
| Number of Positions | 24 |
| Connection profile | 23+PE |
| Number of module slots | 4 |
Insulation characteristics
| Degree of pollution | 3 |
Electrical properties
| Rated voltage (II/2) | 400 V |
| Rated voltage (III/2) | 250 V |
| Rated voltage (III/3) | 250 V |
| Rated voltage (III/3) | 250 V |
| Nominal voltage ATD | 250 |
| Rated surge voltage | 4 kV |
| Rated surge voltage (III/3) | 4 kV |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| Rated current | 10 A |
| Rated current | 10 A |
| Nominal voltage UN | 250 V |
| Nominal current IN | 10 A |
Connection data
| Tightening torque | 0.22 ... 0.25 Nm |
| Conductor cross section flexible | 0.14 mm² ... 0.75 mm² |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Dimensions
| Width | 82.1 mm |
| Height | 26.5 mm |
| Length | 34.7 mm |
Material specifications
| Color of the housing part | gray |
| Material | Polyamide |
| Material | Polyamide |
| Flammability rating according to UL 94 | V0 |
| Insulating material group | I / CTI 600 |
| Housing Material | PA |
| Contact Material | CuZn |
| Contact surface material | nickel-plated |
| Contact carrier material | PA |
| Material for screw connection | 1.5523 (19MNB4) 10.9 |
Cable/line
| Single wire, cross section | 0.14 mm² 1.5 mm² |
| Stripping length of the individual wire | 7 mm |
Mechanical data
| Insertion/withdrawal cycles | ≥ 100 |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 100 °C |
Why Proax for Phoenix Contact 1607370?
Proax is an authorized distributor of Phoenix Contact 1607370 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1607418 - Contact insert set, Range of articles: VARIOCON, design: VC3, housing material: PA, number of positions: 32, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 160, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607322 - Contact insert set, Range of articles: VARIOCON, design: VC3, housing material: PA, number of positions: 8, min. conductor cross section: 0.2 mm2, max. conductor cross section: 4 mm2, rated voltage: 400, rated current: 20 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607383 - Contact insert set, Range of articles: VARIOCON, design: VC4, housing material: PA, number of positions: 30, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 250, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607359 - Contact insert set, Range of articles: VARIOCON, design: VC2, housing material: PA, number of positions: 18, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 250, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607431 - Contact insert set, Range of articles: VARIOCON, design: VC4, housing material: PA 6.6, number of positions: 40, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 160, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607407 - Contact insert set, Range of articles: VARIOCON, design: VC2, housing material: PA, number of positions: 24, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 160, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607335 - Contact insert set, Range of articles: VARIOCON, design: VC4, housing material: PA, number of positions: 10, min. conductor cross section: 0.2 mm2, max. conductor cross section: 4 mm2, rated voltage: 400, rated current: 2 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607311 - Contact insert set, Range of articles: VARIOCON, design: VC2, housing material: PA, number of positions: 6, min. conductor cross section: 0.2 mm2, max. conductor cross section: 4 mm2, rated voltage: 400, rated current: 20 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607790 - Panel mounting frames, Range of articles: VARIOCON, design: VC4, housing material: Polyamide, Required for supporting base elements and voltages > 42 V
1853230 - Panel mounting frames, Range of articles: VARIOCON, design: VC3, housing material: Copper alloy, For painted surfaces with conductive panel cutout
1607346 - Contact insert set, Range of articles: VARIOCON, design: VC1, housing material: PA, number of positions: 12, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 250, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607394 - Contact insert set, Range of articles: VARIOCON, design: VC1, housing material: PA, number of positions: 16, min. conductor cross section: 0.14 mm2, max. conductor cross section: 1.5 mm2, rated voltage: 160, rated current: 10 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607298 - Contact insert set, Range of articles: VARIOCON, design: VC1, housing material: PA, number of positions: 4, min. conductor cross section: 0.2 mm2, max. conductor cross section: 4 mm2, rated voltage: 400, rated current: 20 A, Contact connection type: Pin, Connectors may only be connected/disconnected when under no load.
1607761 - Panel mounting frames, Range of articles: VARIOCON, design: VC1, housing material: Polyamide, Required for supporting base elements and voltages > 42 V
