Official DistributorSKU
MPN
HC-D 7-I-CT-M
Weight
0.009 kg
This product is Not Cancellable/Not Returnable
Series HC-D
HC-D 7-I-CT-M - Contact insert
Contact insert, number of positions: 7+PE, size: D7, number of connections per position: 1, Pin, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2, Only suitable for plastic housings
- Can be used in rail vehicles, satisfy DIN EN 45545-2 with requirement sets R22, R23, and R24 in hazard levels HL1, HL2, and HL3.
Technical Specifications
Notes
| General | For HC-D7 housing, crimp contacts CK1,6-ED (crimp contacts not included in scope of supply) |
| General | Connectors may be operated only when there is no load/voltage. |
| General | This product replaces 1674456 HC-D 7-ESTC-R |
Mounting
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Assembly instructions | The contact insert may on be installed in plastic housings of the HC-D07-STA...-PL-BK range. |
Product properties
| Series | HC-D |
| Type | D7 |
| Number of Positions | 7 |
| Note number of positions | 7+PE |
| Connection profile | 7+PE |
| Contact numbering | 1 - 7 |
| Number of connections per position | 1 |
| Contact material type | turned |
| Contact material type | rolled |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Dimensions
| Width | 21 mm |
| Height | 32 mm |
| Length | 21 mm |
Mechanical characteristics
| Contact diameter | 1.6 mm |
Connection technology
| Connection technology | Crimp connection |
| Number of connections per position | 1 |
| Connection in acc. with standard | IEC / EN |
Conductor connection
| Conductor Cross Section | 0.14 mm² ... 2.5 mm² |
| Connection cross section AWG | 26 ... 14 |
| Tightening torque | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| Stripping length of the individual wire | 8 mm (0.14 mm² ... 1.5 mm²) |
| Stripping length of the individual wire | 6 mm (2.5 mm²) |
Electrical properties
| Rated voltage (III/3) | 250 V |
| Rated surge voltage | 4 kV |
| Rated current | 10 A |
| SCCR | 5 kA (UL 2237) |
Mechanical data
| Insertion/withdrawal cycles | ≥ 500 |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Seal material Profile gasket | NBR, conductive |
| Contact Material | Copper alloy |
| Contact surface material | Ag (alternatively Au) |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 125 °C (including heating up of contacts) |
Standards and Regulations
| Constructional and testing regulations | DIN VDE 0627/86 |
| Constructional and testing regulations | DIN VDE 0110/02.79 |
| Constructional and testing regulations | DIN VDE 0110-1/04.97 |
| Constructional and testing regulations | IEC 60664-1, DIN IEC 60512 |
| Constructional and testing regulations | IEC 60352 |
| Tests | DIN VDE 0627/86 |
| Tests | DIN VDE 0110/02.79 |
| Tests | DIN VDE 0110-1/04.97 |
| Tests | IEC 60664-1, DIN IEC 60512 |
| Tests | IEC 60352 |
Testing
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Accessories
CRIMPFOX-TC 4 - Crimping pliers, for CK 1,6-ED..., CK 2,5-ED..., CK 4,0-ED... turned contacts, 4 marked die stations, unlockable pressure lock, lateral entry, incl. positioning tool
UNIFOX MT-CK 1.6/2.5 - Assembly tool, for CK 1.6... crimp contacts for small conductor cross sections
HC-D 7-DS-IP65 - Sealing screw, size: Countersunk head, IP67, replacement part for D7 size HEAVYCON housing
CK1,6-ED-0,37ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.14 mm2 ... 0.37 mm2, AWG 26 ... 22- CK1,6-ED-0,50ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20
- CK1,6-ED-0,75ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.75 mm2 ... 0.75 mm2, AWG 18
- CK1,6-ED-1,00ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1 mm2 ... 1 mm2, AWG 18
- CK1,6-ED-1,50ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
- CK1,6-ED-2,50ST AG - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 2.5 mm2 ... 2.5 mm2, AWG 14
CK1,6-ED-0,37ST AU - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 0.37 mm2, AWG 22 ... 24- Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20
- CK1,6-ED-0,75ST AU - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.75 mm2 ... 0.75 mm2, AWG 18
- Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 1 mm2 ... 1 mm2, AWG 18
- CK1,6-ED-1,50ST AU - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
- CK1,6-ED-2,50ST AU - Crimp contact, contact diameter: 1.6 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 2.5 mm2 ... 2.5 mm2, AWG 14
CK1,6-ER-1,00ST OIC AG - Crimp contact, contact diameter: 1.6 mm, rolled, Pin, contact material: Cu alloy, nickel-plated, contact surface: silver-plated, connection cross section: 0.34 mm2 ... 1 mm2, AWG 22 ... 17
CK1,6-ER-2,50ST OIC AG - Crimp contact, contact diameter: 1.6 mm, rolled, Pin, contact material: Cu alloy, nickel-plated, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 2.5 mm2, AWG 16 ... 14
CK1,6-BR-1,00ST OIC AG - Crimp contact, contact diameter: 1.6 mm, rolled, Pin, contact material: Cu alloy, nickel-plated, contact surface: silver-plated, connection cross section: 0.34 mm2 ... 1 mm2, AWG 22 ... 17, Taped products
Crimp contact, contact diameter: 1.6 mm, rolled, Pin, contact material: Cu alloy, nickel-plated, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 2.5 mm2, AWG 16 ... 14, Taped products
Why Proax for Phoenix Contact 1584334?
Proax is an authorized distributor of Phoenix Contact 1584334 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
HC-D 7-I-CT-F - Contact insert, number of positions: 7+PE, size: D7, number of connections per position: 1, Socket, Crimp connection, 250 V, 10 A, 0.14 mm2 ... 2.5 mm2, Only suitable for plastic housings
HC-D 7-EBUC-COD - HEAVYCON female insert, D7 series, 7-pos. + PE, crimp connection with coding option
HC-D 7-EBUC - HEAVYCON female insert, D7 series, 7-pos., crimp connection, with IP65 sealing screw
HC-D 7-KML-61/M1PG11 - Coupling housing, with single locking latch, height: 60.5 mm, with screw connection, 1 x Pg11, zinc die-cast
HC-D 7-KML-61/M1PG11/PA - Coupling housing, with single locking latch, height: 60.5 mm, with screw connection, 1 x Pg11, material: PA
HC-D 7-KML-61/O1M20 - HEAVYCON D7 coupling housing, with single locking latch, height: 60.5 mm, with 1 x M20 gland, zinc die-cast
HC-D 7-KML-61/O1M20/PA - HEAVYCON D7 coupling housing, with single locking latch, height: 60.5 mm, with 1 x M20 gland, PA
HC-D 7-KML-61/O1PG11 - Coupling housing, with single locking latch, height 61 mm, without screw connection, 1 x Pg11, zinc die-cast- HC-D 7-KML-61/O1PG11/PA - Coupling housing, with single locking latch, height: 61 mm, with gland, 1 x Pg11, material: PA
Replacement flange seal, for HEAVYCON panel mounting base type D7, self-adhesive, color: Black
HC-D 7-ESTC-COD - HEAVYCON male insert, D7 series, 7-pos. + PE, crimp connection with coding option
HC-D 7-ESTC - HEAVYCON male insert, D7 series, 7-pos., crimp connection, with IP65 sealing screw- HC-D 7-DS-IP65 - Sealing screw, size: Countersunk head, IP67, replacement part for D7 size HEAVYCON housing
HC-D 7-AMLD-24/GR - HEAVYCON panel mounting base D7, with single locking latch, height 24 mm, straight, zinc die-cast, with metal protective cover, for female inserts
HC-D 7-AMLD-24/GR-OD - HEAVYCON panel mounting base D7, with single locking latch, height 24 mm, straight, zinc die-cast, with metal protective cover, for male inserts
HC-D 7-AML-26/GW - HEAVYCON D7 panel mounting base, with single locking latch, height: 25.5 mm, angled, zinc die-cast
HC-D 7-AML-26/GW/PA - HEAVYCON D7 panel mounting base, with single locking latch, height: 25.5 mm, angled, PA
HC-D 7-AML-24/GR/PA - HEAVYCON panel mounting base D7, with single locking latch, height 24 mm, straight, PA
