Official Distributor
SKU
MPN
SACC-M 8MR-3CON-M-SW
Weight
0.013 kg
Series SACC-M
SACC-M 8MR-3CON-M-SW - Connector
Connector, Universal, 3-position, Plug angled M8, coding: A, Screw connection, knurl material: Brass, nickel-plated, external cable diameter 3.5 mm ... 5 mm
- Safe use in the field, thanks to a high degree of protection
- Screw connection: proven connection technology for a large selection of different conductors
Technical Specifications
Notes
Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
Assembly instructions | The wires can be connected both with ferrules (without insulation) and without ferrules. |
Assembly instructions | The connector pin assignment can be rotated 180° to the cable outlet |
Product properties
Sensor Type | Universal |
Number of Positions | 3 |
No. of cable outlets | 1 |
Shielded | no |
Coding | A |
Cable outlet | angled |
Insulation characteristics
Overvoltage category | III |
Degree of pollution | 3 |
Dimensions
Width | 13 mm |
Height | 32.5 mm |
Length | 46 mm |
External dimensions
Outside diameter | 3.5 mm ... 5 mm |
Housing
Diameter housing | 13 mm |
Material specifications
Flammability rating according to UL 94 | HB |
Seal material | NBR |
Material of grip body | PBT |
Contact Material | CuZn |
Contact surface material | Au |
Contact carrier material | PA |
Material for screw connection | Brass, nickel-plated |
Conductor connection
Connection Method | Screw connection |
Connection cross section | 0.14 mm² ... 0.5 mm² (without ferrule) |
Connection cross section | 0.14 mm² ... 0.5 mm² (with ferrule) |
Connection cross section | 0.14 mm² ... 0.5 mm² (solid) |
Connection cross section AWG | 26 ... 20 (without ferrule) |
Stripping length of the individual wire | 4 mm |
Tightening torque | 0.2 Nm (M8 knurl) |
Tightening torque | 0.5 Nm (Connector with coupling sleeve) |
Tightening torque | 0.3 Nm ... 0.4 Nm (Pressure screw for outer cable diameter 3 mm ... 4 mm) |
Tightening torque | 0.8 Nm ... 1 Nm (Pressure screw in the case of external cable diameter 4 mm ... 5 mm) |
Tightening torque | 0.1 Nm (Screw terminal blocks) |
Electrical properties
Rated surge voltage | 1.5 kV |
Contact resistance | ≤ 3 mΩ |
Insulation resistance | ≥ 100 MΩ |
Nominal voltage UN | 48 V AC |
Nominal voltage UN | 60 V DC |
Nominal current IN | 4 A |
Mechanical data
Insertion/withdrawal cycles | ≥ 100 |
Connection 1
Head design | Plug |
Head cable outlet | angled |
Head thread type | M8 |
Coding | A |
Cable/line
Signal type/category | Universal |
Stripping length of the individual wire | 4 mm |
Ambient conditions
Degree of Protection | IP67 |
Ambient Temperature (Operation) | -40 °C ... 85 °C (Plug / socket) |
M8
Standard designation | M8 connector |
Standards/specifications | IEC 61076-2-104 |
Accessories
Why Proax for Phoenix Contact 1407583?
Proax is an authorized distributor of Phoenix Contact 1407583 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended