Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact SACC-E-M12FS-4CON-PG9/0,5 PO
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
1401076
Weight
0.02 kg
This product is Not Cancellable/Not Returnable
Series SACC-E-M

SACC-E-M12FS-4CON-PG9/0,5 PO - Device connector front mounting

Device connector front mounting, 4-position, Socket, straight, M12, coding: A, on free cable end, Front mounting, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire

Technical Specifications

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product
Safety note• Only use tools recommended by Phoenix Contact
Safety note• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting

Mounting TypeFront mounting

Product properties

Number of Positions4
No. of cable outlets1
Shieldedno
CodingA
Thread typeM12

Insulation characteristics

Overvoltage categoryII
Degree of pollution3

Material specifications

Flammability rating according to UL 94V0
Seal materialNBR
Contact MaterialCuZn
Contact surface materialAu
Contact carrier materialPA 66 GF
Material for screw connectionBrass, nickel-plated
Conductor materialTin-plated Cu litz wires

Electrical properties

Rated surge voltage2.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN250 V
Nominal current IN4 A
Max. conductor resistance57.6 Ω/km

Conductor connection

Connection MethodIndividual wires
Contact connection typeSocket
Conductor Cross Section0.34 mm²
Tightening torque2 Nm ... 3 Nm

Connection 1

Head designSocket
Head cable outletstraight
Head thread typeM12
CodingA

Connection 2

Head designfree cable end

Cable/line

Cable Length0.5 m
Cable TypeTPE litz wire
Wire diameter incl. insulation1.2 mm ±0.07 mm
Single wire, colorbrown, white, blue, black
Cable cross section0.34 mm²
Conductor materialTin-plated Cu litz wires
Conductor structure signal line7x 0.25 mm
AWG Signal Line22
Material wire insulationTPE
Thickness, insulation0.21 mm
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Cable resistance≤ 57.6 Ω/km
Cable insulation resistance≥ 20 MΩ*km

Ambient conditions

Degree of ProtectionIP67
Degree of ProtectionIP67
Ambient Temperature (Operation)-25 °C ... 85 °C (Plug / socket)
Ambient Temperature (Operation)-25 °C ... 90 °C (cable, fixed installation)

Standards and Regulations

Standard designationM12 connector
Standards/specificationsIEC 61076-2-101

Why Proax for Phoenix Contact SACC-E-M12FS-4CON-PG9/0,5 PO?

Proax is an authorized distributor of Phoenix Contact SACC-E-M12FS-4CON-PG9/0,5 PO and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Alternate NamesSACCEM12FS4CONPG905PO
Pack Size100
Recommended
  • Phoenix ContactSACC-E-M12FS-4CON-PG 9/0,5 VA
    SACC-E-M12FS-4CON-PG 9/0,5 VA
    1555448 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-PG9/0,5
    SACC-E-M12FS-4CON-PG9/0,5
    1693788 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-PG9/0,5 FFVA
    SACC-E-M12FS-4CON-PG9/0,5 FFVA
    1431429 - Device connector front mounting, FOUNDATION Fieldbus, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239604
  • Phoenix ContactSACC-E-M12FS-4CON-PG9/1,0
    SACC-E-M12FS-4CON-PG9/1,0
    1503276 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 1 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-PG9/1,0 VAPO
    SACC-E-M12FS-4CON-PG9/1,0 VAPO
    1401206 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 1 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-PG9/4,0
    SACC-E-M12FS-4CON-PG9/4,0
    1567694 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 4 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-NPT12/1,0
    SACC-E-M12FS-4CON-NPT12/1,0
    1421082 - Panel feed-through, 4-position/PVC, Socket, straight, M12, coding: A, on free cable end, Front mounting, with 1/2 inch-14 NPT mounting thread, Individual wires, cable length: 1 m, 0.34 mm2, PVC litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-SQ26/ 0,5
    SACC-E-M12FS-4CON-SQ26/ 0,5
    1525869 - Sensor/Actuator flush-type socket, 4-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 4 x 0.34 mm2
  • Phoenix ContactSACC-E-M12FS-4CON-M20/0,5
    SACC-E-M12FS-4CON-M20/0,5
    1408436 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238771
  • Phoenix ContactSACC-E-M12FS-4CON-M16/0,5 VA
    SACC-E-M12FS-4CON-M16/0,5 VA
    1458855 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-4CON-M16/3,0
    SACC-E-M12FS-4CON-M16/3,0
    1544866 - Device connector front mounting, 4-position, Socket, straight, M12, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 3 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/0,2
    SACC-E-M12FS-5CON-PG9/0,2
    1458800 - Device connector front mounting, Universal, 5-position, Socket, straight, M12, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.2 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/0,5
    SACC-E-M12FS-5CON-PG9/0,5
    1671098 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, cable gland Pg9, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/0,5 VA
    SACC-E-M12FS-5CON-PG9/0,5 VA
    1699863 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/1,0
    SACC-E-M12FS-5CON-PG9/1,0
    1548024 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 1 m, cable gland Pg9, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/1,0 VAPO
    SACC-E-M12FS-5CON-PG9/1,0 VAPO
    1401204 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 1 m, cable gland Pg9, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-PG9/4,0
    SACC-E-M12FS-5CON-PG9/4,0
    1567704 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 4 m, cable gland Pg9, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-NPT12/1,0
    SACC-E-M12FS-5CON-NPT12/1,0
    1421084 - Panel feed-through, 5-position/PVC, Socket, straight, M12, coding: A, on free cable end, Front mounting, with 1/2 inch-14 NPT mounting thread, Individual wires, cable length: 1 m, 0.34 mm2, PVC litz wire
  • Phoenix ContactSACC-E-M12FS-3CON-NPT12/1,0
    SACC-E-M12FS-3CON-NPT12/1,0
    1421080 - Panel feed-through, 3-position/PVC, Socket, straight, M12, coding: A, on free cable end, Front mounting, with 1/2 inch-14 NPT mounting thread, Individual wires, cable length: 1 m, 0.34 mm2, PVC litz wire
  • Phoenix ContactSACC-E-M12FS-5CON-SQ26/ 0,5
    SACC-E-M12FS-5CON-SQ26/ 0,5
    1525885 - Sensor/Actuator flush-type socket, 5-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 5 x 0.34 mm2
Sold in quantities of 100

Available for order