TMP-1
Official DistributorSKU
ORITMP1
Series Speed Controllers
Power Controller for Torque Motors
A power controller developed for Oriental Motor's torque motors that allows for easy adjustment of torque. A perfect choice for winding applications, push-motion mechanisms and other situations where torque must be adjusted- Torque can be set using one of three methods; internal potentiometer, external potentiometer or external DC voltage
- Change between two levels by switching between the internal potentiometer and an external potentiometer/voltage
- Alarm output function
- Instantaneous bi-directional operation by CW/CCW signal switching
- Switching of signal input logic between sink and source
Documents
Technical Specifications
| Power Supply | Single-Phase 100/110/115 VAC ±10% 50/60 Hz |
| Power Source for Control | 24 VDC ±10%, 100 mA or more |
| Input Signals | Photocoupler input, Input resistance 4.7 kΩCW input, CCW input, INT/EXT switch input, Alarm reset input |
| Output Signals | Open collector output: 4.5 ~ 26.4 VDC or less, 40 mA or less.Alarm output |
| RoHS Compliant | Yes |
| Safety Standards | UL |
| CE Marking | Low Voltage Directives |
| Insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the main circuit terminals and the control circuit terminals after continuous operation under normal ambient temperature and humidity. |
| Dielectric strength | Sufficient to withstand 3.0 kVAC at 50 Hz or 60 Hz applied between the main circuit terminals and the control circuit terminals for 1 minute under normal ambient temperature and humidity. |
| Ambient Temperature | 0 ~ 50ºC (32 ~ 122ºF) (non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Degree of Protection | IP20 |
| Torque Setting Method | Select one of the following methods:Set using internal torque potentiometer (TORQUE)Set using the external torque potentiometer: PAVR-20KZ (20 kΩ, 1/4 W)Set using external DC voltage: 0 to 5 VDC or 0 to 10 VDC, 1 mA or more. Torque can be adjusted using the fine-tuning potentiometer (ADJUST) |
| Protective Function | When any of the following is activated, the alarm signal will be output, the alarm LED will blink and the motor will stop.The built-in thermal protector of the motor has actuated (become open)Improper motor cable connection or wire breakage |
| Motor Cable Length | The distance between motor and power controller can be extended up to 20 m |
Why Proax for Oriental Motor TMP-1?
Proax is the authorized distributor of Oriental Motor TMP-1. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | TMP1 |
| Pack Size | 1 |
Best Sellersin Speed Controllers
