BHI62E-A
Official DistributorSKU
ORIBHI62EA
200 W (1/4 HP) Induction Motor (Single-Phase 220/230 VAC)
Induction motors are optimal for uni-directional continuous operation such as a conveyor system.- The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class
- Approved under typical international safety standards; bears the CE marking
Technical Specifications
| Motor Type | Induction |
| Frame Size | 4.09 in |
| Output Power | 200 W (1/4 HP) |
| Voltage (VAC) | Single-Phase 220/230 VAC |
| Frequency (Hz) | 60 |
| Current | 1.5 A |
| Shaft/Gear Type | Round Shaft (No Gearhead) |
| Output Shaft Diameter | 14 mm |
| Electromagnetic Brake | Not Equipped |
| Rated Torque | 11.25 lb-in [60 Hz] |
| Rated Speed (rpm) | 1500 [60 Hz] |
| Permissible Overhung Load | 0.39 in. from Shaft End = 72 lb |
| Permissible Thrust Load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| RoHS Compliant | Yes |
| Safety Standards | UL |
| CE Marking | Low Voltage Directives |
| Insulation resistance | 100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
| Dielectric strength | Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to aluminum heat radiation plate (9.06 in. x 9.06 in.) (0.20 in. thickness). |
| Insulation Class | Class B (266ºF [130ºC]) |
| Overheat Protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
| Ambient temperature range | 14ºF ~ 104ºF (-10ºC ~ 40ºC) (non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Degree of Protection | IP40 |
Why Proax for Oriental Motor BHI62E-A?
Proax is the authorized distributor of Oriental Motor BHI62E-A. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | BHI62EA |
| Pack Size | 1 |
Recommended
