Official DistributorSKU
60 W (1/12 HP) Electromagnetic Brake Induction Motor (Three-Phase 200/220/230 VAC)
These motors are coupled to an AC electromagnetic brake which is activated when power is not applied. When the power source is turned off, the motor stops instantaneously and holds the load.- Power off activated type electromagnetic brake
- Conforms to safety standards and global power supply voltages
Documents
Technical Specifications
| Motor Type | Electromagnetic Brake - Induction |
| Frame Size | 3.54 in |
| Output Power | 60 W (1/12 HP) |
| Voltage (VAC) | Three-Phase 200/220/230 VAC |
| Frequency (Hz) | 60 |
| Current | 0.43 A [200 VAC, 60 Hz] |
| Shaft/Gear Type | Round Shaft (No Gearhead) |
| Output Shaft | Metric |
| Output Shaft Diameter | 12 mm |
| Type | Lead Wire |
| Electromagnetic Brake | Equipped |
| Rated Torque | 3.3125 lb-in [60 Hz] |
| Rated Speed (rpm) | 1300 [200 VAC, 50 Hz] |
| Permissible Overhung Load | 0.39 in. from Shaft End = 54 lb |
| Permissible Thrust Load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
| RoHS Compliant | Yes |
| Safety Standards | UL |
| CE Marking | Low Voltage Directives |
| Insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
| Dielectric strength | Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
| Temperature Rise | Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [7.87 x 7.87 in. (200 x 200 mm), Thickness: 0.2 in. (5 mm)] |
| Insulation Class | Class B (266ºF [130ºC]) |
| Overheat Protection | Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
| Ambient temperature range | Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) |
| Ambient Humidity | 85% maximum (noncondensing) |
| Degree of Protection | IP40 |
| Voltage (Brake) | Single-Phase 200/220/230 VAC |
| Current (Brake) | 0.07 A |
| Input | 10 W |
| Static Friction Torque | 71 oz-in |
Why Proax for Oriental Motor 5IK60A-SW2M?
Proax is the authorized distributor of Oriental Motor 5IK60A-SW2M. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | 5IK60ASW2M |
| Pack Size | 1 |
Recommended
