Interior Fittings for Enclosures

TS Adaptor rail, for PS compatibility, for H: 1800 mm

SV Baying bracket E-Cu, L: 88 mm, for E-Cu 40x10 mm

SZ C rail 30/15 to EN 60 715, for TS, SE, for W/D: 1000 mm, L: 955 mm

VX Punched section, with mounting flange 14 x 39 mm, for door width: 400 mm

DK system chassis, for TS, TX CableNet, TE, 17 x 73 mm, L: 530 - 700 mm

TS Partial mounting plate, for TS, SE, W/DH: 500x300 mm

Depending on its depth the component shelf provides several location points, making the distance between the 19" levels variable within certain limits. Each component shelf mounted in this way can be upgraded using telescopic rails to allow full withdrawal. In this case, the telescopic rails are screw-fastened at the site of the spacer bolts.

SZ adapter rail for VX compatibility, for H: 1800 mm

TS Punched rail 18 x 38 mm, for W/D: 400 mm

SZ C rail 30/15 to EN 60 715, for TS, SE, for W/D: 800 mm, L: 755 mm

TS TS punched section without mounting flange, 45 x 88 mm, for inner mounting level: for WD: 600 mm

SZ Earthing strap, size: M8, for diameter 25 mm²

SV Busbar E-Cu, WH: 30x5 mm, L: 565 mm, with integral holes Ø 11 mm

DK Component shelf, WHD: 419x1 Ux700 mm, 50 kg, distance between levels: 600-900 mm, Pull-out, RAL 9005

SZ Contact washer, size: M5

SZ Rail mounting bracket, flat

SZ Rail mounting bracket, tilted

SZ Rail, for EMC rail and stain relief, for W: 1200 mm

SZ Earthing strap, size: M6, for diameter 10 mm²

SZ Self-tapping screws, for thread ST 4,8