Enclosure Accessories

Suitable for TS enclosures instead of a door or rear panel. The partial doors can be combined as required. A front trim panel is required at the top and bottom. Door may be optionally hinged on the right or left. In doors without a viewing window (height 600 – 1000 mm), installation of the monitor frame SZ 2305.000 is possible. Standard double-bit lock insert may be exchanged for lock inserts, type F, and for comfort handle in systems 600 mm or more high.

Suitable for TS enclosures instead of a door or rear panel. The partial doors can be combined as required. A front trim panel is required at the top and bottom. Door may be optionally hinged on the right or left. In doors without a viewing window (height 600 – 1000 mm), installation of the monitor frame SZ 2305.000 is possible. Standard double-bit lock insert may be exchanged for lock inserts, type F, and for comfort handle in systems 600 mm or more high.

Suitable for TS enclosures instead of a door or rear panel. The partial doors can be combined as required. A front trim panel is required at the top and bottom. Door may be optionally hinged on the right or left. In doors without a viewing window (height 600 – 1000 mm), installation of the monitor frame SZ 2305.000 is possible. Standard double-bit lock insert may be exchanged for lock inserts, type F, and for comfort handle in systems 600 mm or more high.

TS Top-mounting module, for TS, for WD: 1000x600 mm

SV Punched rail 17x17 mm, L: 62,5 mm, for TS

SV Punched rail 17x17 mm, L: 137,5 mm, for TS

SV Punched rail 17x17 mm, L: 262,5 mm, for TS

SV Punched rail 17x17 mm, L: 487,5 mm, for TS

For side partitioning of bayed TS8 or TS-IT enclosures. Installs without the need for additional hardware or tools. The partition wall has four 4.41" (112 mm) cable pass through holes, grommet covers included.

To accommodate base plate modules. RAL 9005 (black) Version.

DK Cable duct, WxH: 800x2200 mm, 42 U, For TS IT, RAL 9005

DK Server shutdown software, For CMC III

DK RFID tags, Unwritten tags, Each tag has a "Unique ID", 1 RFID ag is required for each component, For identification of installed 482.6 mm (19") components

DK RFID controller, WHD: 136x44x129 mm, RJ45, 2x Mini-DIN

TS Base/plinth component, front and rear, H: 100 mm, for W: 1800 mm, RAL 7022, sheet steel

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 1200 mm, sheet steel

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 1800 mm, sheet steel

VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 1600 mm, sheet steel

SV Punched rail 17x17 mm, L: 862,5 mm, for TS

Flexible access option with individual 3-digit numerical code, without key, or via the master key function with additional installation of a 40 or 45 mm semi-cylinder to DIN 18 252, irrespective of the numerical code.