Enclosure Accessories

TS TS isolator door cover (US version), WHD: 100x2000x500 mm

For touching up and repairing powder coated and wet-painted surfaces, air drying.

TS TS punched section without mounting flange, 45 x 88 mm, for inner mounting level: for WD: 600 mm

ADAPTER PLATE F/FMDC, HIGH AMP -UPPER POSITON

SV PE/PEN combination angle E-Cu, WH: 30x10 mm

SV Busbar E-Cu, WH: 30x10 mm, L: 965 mm, with integral holes Ø 11 mm

SV Baying bracket E-Cu, L: 95 mm, for E-Cu 30x10 mm

SV Baying bracket E-Cu, L: 95 mm, for E-Cu 30x5 mm

For enclosures without roof plate and to replace the standard roof on other TS enclosures.

For enclosures without roof plate and to replace the standard roof on other TS enclosures.

For enclosures without roof plate and to replace the standard roof on other TS enclosures.

Base/Plinth components, front and rear, stainless steel 316, 200 mm. Notched for TS 8 freestanding, stainless steel 316.

For mounting between the base/plinth components. Base/plinth trims may be installed rotated through 90° in order to stabilise bayed base/plinth components.

DK system chassis, for TS, TX CableNet, TE, 17 x 73 mm, L: 530 - 700 mm

To compensate for height differences with floor irregularities. Assembly thread M12.

2000H1200D TS SIDEWALLS

DK CMC III mounting units, Accommodation of CMC III components, For 482.6 mm (19"), WHD: 138x40x132 mm

Depending on its depth the component shelf provides several location points, making the distance between the 19" levels variable within certain limits. Each component shelf mounted in this way can be upgraded using telescopic rails to allow full withdrawal. In this case, the telescopic rails are screw-fastened at the site of the spacer bolts.

FT System window, for VX, TS, VX SE, 30 section, WHD: 500x470x47 mm, for W: 600 mm

TS Fixing element C-profile rail, For TS rail horizontal