Enclosure Accessories

TS Cable entry plate, for TS, SE and PC enclosures, for W: 800 mm

TS Assembly block

TS Adaptor rail, for PS compatibility, for H: 1800 mm

TS Mounting plate attachment, installation: side with mountingplate infill, in the penultimate position/set forward

TS Side panel, for topmounting module, HD: 200x600 mm

VX Levelling component, for base/plinth H: 100 mm

SV Roof plate, WD: 600x600 mm, IP 2X, for TS, H: 72 mm, with ventilation hole

SV PE/PEN combination angle E-Cu, WH: 30x10 mm

SV Busbar E-Cu, WH: 30x10 mm, L: 965 mm, with integral holes Ø 11 mm

SV Baying bracket E-Cu, L: 95 mm, for E-Cu 30x10 mm

Designed to support components from underneath.

Floor stand kit for SE8 / TS8 enclosures. Material carbon steel, stainless steel 304, or stainless steel 316L.

2000H1200D TS SIDEWALLS

DK system chassis, for TS, TX CableNet, TE, 17 x 73 mm, L: 530 - 700 mm

DK CMC III mounting units, Accommodation of CMC III components, For 482.6 mm (19"), WHD: 138x40x132 mm

Depending on its depth the component shelf provides several location points, making the distance between the 19" levels variable within certain limits. Each component shelf mounted in this way can be upgraded using telescopic rails to allow full withdrawal. In this case, the telescopic rails are screw-fastened at the site of the spacer bolts.

CMC III sensors are used to monitor the physical environment and can be directly connected to the PU by an RJ45 CAN bus connection cable. The sensors can also be interconnected as a bus.

CMC III sensors are used to monitor the physical environment and can be directly connected to the PU by an RJ45 CAN bus connection cable. The sensors can also be interconnected as a bus.

TE Module plate, WxD: 450x50 mm, Compensating panel, For W: 600 mm

TE Module plate, WxD: 450x150 mm, Compensating panel, For W: 600 mm