Machine Automation Controllers

Digital output unit, 8 x transistor outputs, PNP, 0.5 A, 24 VDC, with short-circuit protection and alarm, screw terminal

Sysmac NX1 Modular CPU with with Database Connectivity, 5MB program and 33.5MB data memory , built-in EtherCAT (2 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (OPC-UA and EtherNet/IP)

Sysmac NX1P Analog I/O screwless option board, 2 x analog inputs 0 to 10 V, resolution 1/4000 or 0 to 20 mA, resolution 1:2000

Sysmac NX1P RS422/485 screwless (50 m max.) serial communication option board

0.42 A Current Consumption at 5 VDC Profinet Master Unit

6 Inputs Resistance Temperature Detectors (RTD) Input Unit

Sysmac NJ1 CPU, 3MB memory, built-in EtherCAT (2 servo axes, in total 64 EtherCAT nodes) and EtherNet/IP

Serial high-speed communication unit, 2x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, MODBUS-RTU, MODBUS-ASCII, Host Link), MODBUS RTU Slave, up to 230 kbps

Digital input unit, 32 x 24 VDC inputs, FCN40 connector (not included)

Digital input unit, 32 x 24 VDC inputs, MIL40 connector (not included)

Sysmac NX power supply unit, 100 to 240 VAC, 90 W, "RUN" output relay

Sysmac NX1P RS422/485 screwless (isolated 500 m max.) serial communication option board

Digital output unit, 64 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, 2 x FCN40 connectors (not included)

2 loops, Thermocouple/Pt100 input, PNP 2 Digital Outputs 24 VDC, 21 mA/point, Heat or Cool control, Push-in Plus terminals

Digital output unit, 16 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, screw terminal

Digital output unit, 8 x transistor outputs, NPN, 2.0 A, 12 to 24 VDC, screw terminal

Sysmac NX1P Analog I/O screwless option board, 2 x analog outputs 0 to 10 V, resolution 1:4000

I/O connection cable, MIL40 to MIL40, 1.5 m

Digital output unit, 64 x transistor outputs, NPN, 0.3 A, 24 VDC, 2 x MIL40 connectors (not included)

Digital output unit, 8 x triac outputs, 250 VAC, 0.6 A, screw terminal