Programmable Logic Controllers (PLC)

DeviceNet master/slave unit for CS-series

CPU, 60K steps program, 32K words data memory, 32K words x 4 banks EM, 2560 I/O max, RS-232C serial port, USB programming port, 3 expansion racks max.

Power supply unit, 100-240 VAC, output capacity: 25 W, with maintenance forecast monitor

Digital input unit, 8 x 24 VDC, independent inputs, screw terminal

Sysmac NX7 CPU with Database Connectivity, 80MB memory, built-in EtherCAT (128 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP ports

PLC, 24 VDC supply, 24 x 24 VDC inputs, 16 x relay outputs 2 A, 10K steps program + 32K words data memory

Analog output unit, 8 x outputs 4 to 20 mA, resolution 12 bit, screw terminal

PLC, 100-240 VAC supply, 12 x 24 VDC inputs, 8 x relay outputs 2 A, 5K steps program + 10K words data memory

Temperature control unit, R/S/K/J/T/L/B thermocouple inputs, transistor (PNP) output, 4 loops

Digital input unit, 64 x 24 VDC inputs, 2 x FCN40 connectors (not included)

PLC, 24 VDC supply, 24 x 24 VDC inputs, 16 x PNP outputs 0.3 A, 1 x analog input, 20K steps program + 32K words data memory

Duplex expansion backplane, 9 I/O slots, use CS1D-PA207R power supplies only

4 loops, Thermocouple/Pt100 input, PNP 8 Digital Outputs 24 VDC, 21 mA/point, Heat and Cool control, Push-in Plus terminals

PLC, 24 VDC supply, 12 x 24 VDC inputs, 8 x PNP outputs 0.3 A, 5K steps program + 10K words data memory

End plate for CJ1 CPU rack or expansion rack. Only required as spare part.

AXC F 1152 - PLCnext Control for the direct control of Axioline F I/Os. With two Ethernet interfaces. Complete with connector and bus base module.

Power supply unit, 24 VDC, output capacity: 19.6 W

Sysmac NX1P Analog I/O screwless option board, 2 x analog inputs 0 to 10 V, resolution 1:4000 or 0 to 20 mA, resolution 1:2000, 2 x analog outputs 0 to 10 V, resolution 1:4000

Analog output unit, 8 x outputs 4 to 20 mA, resolution 12 bit, screw terminals

2 Axis Pulse Input/Output (I/O) Module