PLC & HMI

4-ch, 24-Bit DSA PCIE Card

16-bit, 32-ch Analog Output PCIE card

4-ch, 80MS/s Digitizer PCIE Card

1MS/s/ch, 18-bit, 8-ch, Simultaneous AI card

CX-Supervisor V3 to V4.0 developer upgrade

CPU for duplex system, 250K steps program, 448K words data memory, 7 duplex expansion racks max, hot standby CPUs, hot swap I/O. Support FB and ST programming language

AXC F 3152 - PLCnext Control for the direct control of Axioline F I/Os. With three independent Ethernet interfaces. Complete with connector and bus base module.

Industrial Raspberry Pi 4 Gateway Kit w

Software - VISU+ 2 SP BACNET

Serial high-speed communication unit, 1x RS-232C port + 1x RS-422/485 port, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, MODBUS-RTU, MODBUS-ASCII, Host Link), MODBUS RTU Slave, up to 230 kbps

PLC, 24 VDC supply, 18 x 24 VDC inputs, 12 x PNP outputs 0.3 A, 10K steps program + 32K words data memory

ILB ETH 24 DI16 DIO16-2TX - Inline, Block IO, Ethernet, RJ45 jack, Digital inputs: 32, 24 V DC, connection technology: 3-conductor, Digital outputs: 16, 24 V DC, connection technology: 2-conductor, degree of protection: IP20, including Inline connector

1MS/s, 16bit, 32-ch Analog Input PCIE Card

1 Machine Units FLNet Network Unit

Digital I/O unit, 32 x 5 VDC TTL inputs, 32 x 5 VDC TTL outputs, 2 x MIL40 connectors(not included)

Controller Link 3-pole terminal block, 5 pcs.

Temperature control unit, Pt100 RTD inputs, transistor (NPN) output, 2 loops, heater burnout detection function

CPU, 20K steps program, 32K words data memory, 7 expansion racks max.

CPU, 30K steps program, 64K words data memory, 7 expansion racks max.

CPU backplane with C200H I/O BUS, 2 I/O slots