PLC & HMI

Digital input unit, 8 x 200-240 VAC inputs, screw terminal

Digital quick response input unit, 16 x 24 VDC inputs, single shot pulse capture 30 µs minimum, screw terminal

2 Digital Outputs Motion Controller

Digital I/O unit, 16 x 24 VDC inputs, 16 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, 2 A max, 2 x FCN24 connectors (not included)

Digital I/O unit, 32 x 24 VDC inputs, 32 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, 3.2 A max, 2 x FCN40 connectors (not included)

Digital I/O unit, 32 x 24 VDC inputs, 32 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, 3.2 A max, 2 x MIL40 connectors (not included)

Digital output unit, 8 x transistor outputs, NPN, 0.5 A, 24 VDC, screw terminal

Isolated analog input unit, 2 x inputs 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, -5 to 5 V, 0 to 10 V, -10 to 10 V, 0 to 1.25 V, -1.25 to 1.25 V, resolution 1:64000, 10 ms conversion time, screw terminal

[NON-RoHS product - spare part only] Thermocouple input unit, 2 x inputs type B, E, J, K, L, N, R, S, T, U, C (WRe-5-26), P (PLII), -100 to 100 mV, resolution 1:64000, 10 ms conversion time, screw terminal

Temperature control unit, R/S/K/J/T/L/B thermocouple inputs, transistor (NPN) output, 2 loops, heater burnout detection function

Temperature control unit, R/S/K/J/T/L/B thermocouple inputs, transistor (PNP) output, 2 loops, heater burnout detection function

CPU with built-in EtherNet/IP port, 400K steps program, 32K words data memory, 32K words x 25 banks EM, 2560 I/O max, RS-232C serial port, USB programming port, 3 expansion racks max.

CompoNet I/O unit, 8 x 24 VDC inputs NPN & 8 x transistor outputs NPN 0.5 A, screw terminals

Duplex CPU backplane, 5 I/O slots, use CS1D-PA207R power supplies only

CPU for duplex system, 60K steps program, 128K words data memory, 7 duplex expansion racks max, hot standby CPUs, hot swap I/O

High Speed Counter Unit

CPU for duplex system, 250K steps program, 448K words data memory, 7 duplex expansion racks max, hot standby CPUs, hot swap I/O

Duplex Unit

CS1D Ethernet unit, 1 x RJ45 socket, supports dual-redundant use

Power supply unit for duplex system, 100-120/200-240 VAC high power, RUN output, CS1 duplex backplanes only