PLC & HMI
DeviceNet digital output unit, 16 x transistor outputs 0.5 A, 24 VDC, NPN, screw terminal block
Sysmac NX1P RS422/485 screwless (isolated 500 m max.) serial communication option board
Not in stock
AXL E ETH IOL8 DI4 M12 6P - Axioline E, Ethernet, M12 connector, IO-Link ports Class A: 4, connection method: M12 connector, connection technology: 3-conductor, IO-Link ports Class B: 4, connection method: M12 connector, connection technology: 3-conductor, Digital inputs at pin 2 for class A ports: 4, 24 V DC, connection technology: 3-conductor, Plastic housing, degree of protection: IP65/IP67
Not in stock
Digital output unit, 64 x transistor outputs, NPN, 0.5 A, 12 to 24 VDC, 2 x FCN40 connectors (not included)
16 Digital Outputs, Standard speed, PNP 24 VDC, 0.5 A/point, 4 A/NX Unit, MIL20 connector (not included), 30 mm wide
Not in stock
AXL F AI4 U 1H - Axioline F, Analog input module, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 100 Mbps, integrated sensor supply, degree of protection: IP20, including bus base module and Axioline F connectors
Cable, RS-232C, for programming PLC or HMI 9-pin port from PC 9-pin port, 2 m
Not in stock
CRT1/DRT2/GX-series I/O expansion unit, 16 x 24 VDC inputs, NPN (1 max per I/O terminal, specific models only)
Not in stock
VIP-3/PT/D25SUB/F - VARIOFACE module, with push-in connections and D-SUB 25 socket connector, for mounting on NS 35 rails
Not in stock
Digital output unit, 16 x transistor outputs, PNP with short circuit protection, 0.5 A, 24 VDC
Not in stock
I/O option board (only CP1L-EL/EM port 1 or 2), 2 x analog inputs 0 to 10 V, resolution 1/4000 or 0 to 20 mA, resolution 1:2000
1 x Incremental Encoder NPN Input, Phases A and B: Single-phase 500 kHz (phase difference pulse Input x4: 125 kHz), Phase Z: 125 kHz, screwless push-in connector, 12 mm wide
