Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Advantech

Oriental Motor

Curtis

Sprecher Schuh

Wittenstein

Hiwin

R88A-CA1D010BF

10 m Length Robotic Motor Power/Brake Cable

R88M-1AL2K030T-BS2

1SA AC servo motor, 2 kW, 230 VAC, 3000 rpm, 6.37 Nm, absolute encoder, with brake

<h3>Power Supply Cable and I/O Signal Cable Set (Digital Driver) (0.3m)</h3>Power supply cable is used to connet the driver and power supplym I/O signal cable is used to connect the driver and programmable controller. Cables comes as a set of power supply and signal cable.

LHS003CD

Power Supply Cable and I/O Signal Cable Set (Digital Driver) (0.3m)

3AXD50000017940

The ACQ580-01 drives deliver innovative pump features for the water and wastewater industry, securing energy efficient flow of water and wastewater in your pumping solutions.  This robust and compact wall-mounted drive has built-in pump application functionality such as sensorless flow calculation, multipump control, level control, soft pipe fill, dry run protection, quick ramps and a solution for keeping the impeller of the pump clean. Usability is further enhanced with the intuitive Hand-Off-Auto control panel, the PC tool Drive composer and an optional Bluetooth® control panel. The built-in energy calculator visualizes the energy savings achieved with the use of the drive. The ACQ580-01 variant comes in IP21 enclosure as standard and can be installed on the wall. Also, IP55 and flange mounting units are available.

ACQ580-01-302A-4

LV AC wall-mounted drive for water and wastewater, UL: Pld 250 Hp, 302 A, 460 V (ACQ580-01-302A-4)

R88D-1SAN10H-ECT

R88M-1AL1K030T-S2

1SA AC servo motor, 1 kW, 230 VAC, 3000 rpm, 3.18 Nm, absolute encoder

R88A-CR1A005CF

3G3AX-RX-ECT

The ACS380 machinery drive comes in several variants ensuring seamless integration into machines and connecting perfectly to automation systems. It’s a great fit for industries such as food and beverage, material handling and textile. Typical applications include mixers, conveyors, EOT and tower cranes, extruders and textile machinery.  With the integrated functional safety features, the ACS380 drive can be also part of the machine’s safety system via PROFIsafe over PROFINET, ensuring the motor is safely stopped when required. In addition, the drive’s software can be easily customized with adaptive programming to match any specific application requirements.

ACS380-040N-05A6-4

LV AC machinery drive module, IEC: Pn 2.2 kW, 5.6 A, 400 V, UL: Pld 3 Hp, 4.8 A, 480 V (ACS380-040N-05A6-4)

ACS380040N09A44

R88M-1L1K030C-BS2

1S AC servo motor, 1 kW, 400 VAC, 3000 rpm, 3.18 Nm, absolute encoder, with brake

R7A-CPB001S

SmartStep 2 series servo control cable, 1m

R88D-KT02L

R88MK1K530CS2

G5 series AC servo motor, 1.5 kW, 400 VAC, 3000 rpm, 4.77 Nm, Absolute encoder

R88A-SC10CA

1S series cable clamp L. Used in 400 V drives (from 5.5 kW to 15 kW)

R88M-1M1K520T-BS2

1S AC servo motor, 1.5 kW, 230 VAC, 2000 rpm, 7.16 Nm, absolute encoder, with brake

ACS580-01-017A-6-2-N1

R88M-K20030L-S2

G5 series AC servo motor, 200 W, 100 VAC, 3000 rpm, 0.64 Nm, Incremental encoder

R88A-PD2007

 Gearheads

 Brushless DC Motors

Sprecher + Schuh offers a broad selection of pre-assembled or "build-from-stock" starters housed in a high impact, non-metallic, cUL approved, Type 1, 12, 4/4X enclosure. Built for convenience, space savings and economy, the KWIKstarter line is efficiently designed to use stock CA7/CAU7 contactors and advanced CEP7 solid state or CT7N thermal overloads. Contactor and overload are either prewired and pre-mounted onto the enclosure's built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.KWIKstarters control motors up to 30HP @ 460V (30HP @ 575V) in two enclosure sizes measuring only 208 x 98mm (8.19" x 3.86") or 250 x 125mm (9.84” x 4.92”). This covers over 85% of industrial motor control applications in a very compact package that can be mounted adjacent to or directly on equipment.KWIKstarters are available in UL sizes 9 to 43 amps, or NEMA labeled sizes 00, 0, 1 and 2. The enclosure and controls are designed for simplicity. A variety of control options and sizes make it a versatile off-the-shelf motor starter for a variety of common applications.<ul><li>cUL Approved</li><li>Type 1/12/4/4X</li><li>IP66</li><li>Up to 15 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Start-Stop, Multi-Function, H-O-A, Reversing, E-Stop</li><li>IEC or NEMA labeled</li><li>125 x 125 x 250 mm (5 x 5 x 10 in) max.</li></ul>

KWIKstarters

Sprecher + Schuh offers a complete line of combination and non-combination starters suitable for almost any HVAC/R application in the industry. Standard HVAC/R starters range from NEMA Size 00 up to NEMA size 3 (50HP @460V AC).Sprecher + Schuh Fractional Manual Starters (FMS) consist of a snap switch combined with a thermal overload device operating on the solder-ratchet principle. To reset the overload mechanism, the switch lever is moved to the OFF position. The motor can be restarted by simply pushing the switch lever to the ON position. The switch is designed to prevent being held closed under a sustained motor overload.Sprecher + Schuh NEMA labeled KWIKstarters are housed in a high impact, nonmetallic, cUL Approved, Type 1, 12, 4,4X enclosure. Built for convenience, space savings and economy, KWIKstarters are efficiently designed to use stock CAN7 contactors and CEP7 or CT7N overloads. Contactor and overload are either pre-wired and pre-mounted onto the enclosure’s built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.Standard starters include Non-combination, Fusible, Non-Fusible and Molded Case Circuit Breaker disconnects. All sizes are available in metallic Type 1 General Purpose or Type 3R Outdoor Rain tight enclosures. Three-phase and Single-Phase styles are available. An additional factory assembled option is the fireman damper interface, especially designed for meeting the needs of building and contractor specifications for shut down control.<ul><li>Features and Spec bullets</li></ul>

FMS & NEMA Labeled Starters

Sprecher + Schuh non-combination magnetic motor starters are intended to eliminate the purchase and assembly of a separate contactor, overload relay and associated wiring. When purchased with an enclosure, the starters are mounted and ready to install on receipt.At the heart of all magnetic starters is the Sprecher + Schuh CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Magnetic starters are equipped with Sprecher + Schuh's CEP7 solid state overload relay as a standard selection. Unlike traditional overload relays that indirectly sense motor current through heater elements, CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics. The electronics provide numerous advantages over electromechanical relays.<ul><li>cUL Approved</li><li>CE, CSA</li><li>Type 1/12/4/4X</li><li>Up to 900 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Non-Combination Starters

Sprecher + Schuh's through-the-door operated combination starters represent an economical alternative to the classic flange-operated solution. They are designed to meet rigid UL/NEC withstand specifications. Sprecher + Schuh has been building custom control panels with this design for years. Experience the durability of this product!At the heart of all Sprecher + Schuh combination starters is the CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Standard Sprecher + Schuh combination starters are equipped with the state of the art CEP7 solid state overload relay. CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics (ASICs). The electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Lockout/Tagout accessories</li><li>Quick make/quick break, non-teasing action</li><li>Suitable for interrupting up to 200,000 amperes when class "J" fuses are used</li><li>UL98 standards for service entrance requirements</li><li>NFPA 79</li><li>cUL, CE, CSA</li><li>Type 1/12/4/4X or 3R</li><li>Up to 500 HP @ 600V AC</li><li>AC and DC</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Combination Starters

All standard Sprecher + Schuh starters use the CAT7 or CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity. Protecting these specialty starters is the state of the art CEP7 solid state overload relay. The CEP7 electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Contactor (with AC coil)</li><li>Overload relay protection</li><li>Thermal magnetic circuit breaker</li><li>J-Type Fuses</li><li>Selection of cover controls</li><li>Enclosures Type 1, 4, 4X, 12, 3R</li><li>Oversized back pan for plenty of wiring space</li><li>UL approved</li></ul>

RVAT, Multi-Speed & Pump

The PF Softstarter Controller provides intelligence, unmatched performance, flexibility, and diagnostics in a modular compact design for controlling either a standard squirrel-cage induction motor or a star-delta motor. Seven standard, and two optional starting modes of operation are available within a single controller.As standard, this true three-phase controlling device includes electronic overload protection with programmable trip class, integral run bypass, increased motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. The PF Controller comes equipped with a built-in keypad and LCD display for programming the controller parameter settings for the specific industrial application.Three starting modes<ul><li>PFS Standard</li><li>PFB Pump Control</li><li>PFD Braking Control</li></ul><ul><li>16 Current Models</li><li>Control Voltage: 120-240VAC or 24V AC/DC</li><li>Voltage Range: 200...600VAC 3...400HP @460VAC</li><li>Standard 3-wire or Y-Delta motor connections</li><li>Built-in Bypass Contactor</li><li>Built-in Electronic Motor Overload Protection</li></ul>

Series PF Softstarters

ACS580 Drives Key Features:<ul><li>All-in-One Design: Comes with built-in features and components, reducing the need for external devices and simplifying installation.</li><li>Easy to Use: Intuitive user interface with startup assistants and a simple menu structure for quick commissioning and operation.</li><li>Versatile Applications: Suitable for both variable and constant torque loads like pumps, fans, conveyors, mixers, and compressors.</li><li>Energy Efficiency: Includes features like an energy optimizer to improve efficiency and reduce electricity consumption.</li><li>Safety First: Integrated safety functions such as Safe Torque Off (SIL 3) ensure machine and personnel safety.</li></ul><h3>Technical Highlights:</h3><ul><li>Power Range: 0.75 kW to 500 kW</li><li>Voltage Range: 200 V to 480 V</li><li>Enclosures Available: IP00, IP20, IP21, IP42, IP54, IP55</li><li>Communication &amp; Compatibility: Part of ABB’s “all-compatible” drive family with consistent interface and architecture for easy integration.</li></ul>

Motor & Drives