Temperature and Process Controllers
Temp. controller, PRO, DIN Rail 22,5mm, Uni. I/P,1x0/4-20mA curr. OUT,2 AUX,No cov.,100-240 VAC
E5CN accessory, quick link programming cable for the E5_N and CelciuX (EJ1) range, allows direct connection without requirement for communications card. USB connection to PC/Laptop and special connector for controller, Includes USB driver
CelciuXº In-panel temperature controller basic unit, DIN rail mounting, 2 loops, thermocouple/Pt100/analog input, 2 x 12 VDC plus 2 x 30 VDC, 0.1 A NPN outputs, heat, cool, heat/cool, heater burnout alarm, M3 screw terminals
Temp. controller, PRO; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms;1st out 12 VDC
Temperature controller, 1/16 DIN (48x48 mm), 1 Relay output, 3 AUX, 2 Event input, Heater burnout and SSR failure alarm, 24 VAC/DC
Temp. controller PRO,1/32 DIN (24x48mm),screw terminals,No AUX Rel.,1 x relay OUT,100-240 VAC
Basic temperature controller, 1/16 DIN, 48 x 48 mm,Dial knob,On-Off Control,J-Thermocouple,0-200deg.,100 to 240V AC
Temp. sensor,Smooth tube with R1/8 mounting, Pt100 class B, -50-250 deg.,dia. 4mm, 65mm,SUS 304, pre-wired, open cable ends, 2m
Not in stock
E5CN-H option board- event inputs and control output option (voltage pulse), **only compatible with new E5CN-H models**
Not in stock
Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,100-240 VAC
Not in stock
Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,EVT. I/P 4,Ht. Burnout SSR fail.,100-240 VAC
Not in stock
Temp. controller, PRO,1/4 DIN (96x96mm),1x0/4-20mA curr. OUT,1 x 12 VDC pulse OUT,4 AUX,EVT. I/P 6,Rem. SP I/P,Ht. Burnout SSR fail.,Transf. OUT,24VAC/DC
Not in stock
Temp. controller, PRO; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms; 1st out current (lin)
Not in stock