Measurement & Monitoring

Monitoring relay 17.5mm wide, phase sequence and loss in 3 phase 3 wire, 200-480 VAC, 1 x SPDT

MCR-S-1-5-UI-SW-DCI-NC - MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, with relay and transistor output, input current 0 ... 0.2 A to 0 ... 11 A, unconfigured

Motor Condition Monitoring, AC, 3-phase, Induction motor, Insulation resistance model, 24 VAC/VDC, Transistor control output, Push-in Plus, LCD display, Ethernet IP

Dust-proof rubber Cap (for PS-31)

Thermal condition monitoring device for control cabinets and panels, 24 VDC, transistor control output, Push-in Plus, LCD display, EtherNet/IP and Modbus TCP

Infrared thermal sensor for K6PM-THMD-EIP, 24 VDC, 0°C - 200°C, 1,024 pixels, FOV 90° × 90°

Temp. controller, LITE, 1/16 DIN, 48x48mm,Dial knob,On-Off Control,Pt100,0-200deg.,100-240V AC

Temp. controller, PRO, DIN Rail 22.5 mm, Uni. I/P, 1x0/4-20 mA curr. OUT, No AUX,RS-485, No cov., 24 VAC/DC, Push-in plus terminal

Infrared thermosensor, -50-500 °C, 40/500 mm dia. field, 12-24 VDC, 4-20 mA output, with laser pointer

Temp/Humid Sensor

CT sensor for Current analysis model K6CM-CIM, 25A rated primary-side current

ZCT sensor for Insulation Resistance model K6CM-ISM, 200 to 480 VAC, 52mm dia. Through hole

IOA PR-DAI/DAO/F/DS/0.25A/EX - Fuse module for VIP I/O marshalling base elements with replaceable 0.25 A fuse in the field device supply path. Integrated test points and a disconnect knife allow uninterrupted signal measurement.

Current Transformer (CT), with lead-wire, hole diameter 5.8 mm

Frequency/rate meter, DIN 96x48 mm, color change display, pulse input, 2NO relay output, 100-240 VAC

Temperature controller, 1/16 DIN (48x48 mm), 1 Relay output, 3 AUX, RS-485, SSR failure detection/3-phase, 100-240 VAC

Temp. controller PRO,1/32 DIN (24x48mm),screw terminals,1 AUX,1 x 12 VDC pulse OUT,RS-485,24V AC/DC

Temp. controller; 1/4 DIN (96x96 mm); t/c & Pt100 & analog;4 alarms; 1st out current (lin);Event IP ( 2);RS-485;USB

Temperature controller, 1/16 DIN (48x48 mm), 1 Relay output, 3 AUX, 2 Event input, Transfer output, 24 VAC/DC

Monitoring relay 22.5mm wide, Single phase over or under current 2 to 500mA AC or DC, One SPDT, 24VAC/DC