Measurement & Monitoring
FA MCR-EX-DS-I-I-OLP - Ex i, Output loop-powered process indicator for installation in the control cabinet. HART
IOA PR-DAI/DAO/F/DS/2A/EX - Fuse module for VIP I/O marshalling base elements with replaceable 2 A fuse in the field device supply path. Integrated test points and a disconnect knife allow uninterrupted signal measurement.
Not in stock
Temp. controller, PROplus, 1/4 DIN, (96 x 96)mm,2 x OUT option,2 x Aux OUT,HT Burnout SSR Fail./3Phs.,Event I/P & Transf. OUT,option unit,Terminal cov.,100-240V AC
Digital panel meter, DIN1/8 (48(h) x 96(w)), 2 line display with dual color change for actual value, output and option slots, Up/Down counting pulse, 30Hz to 50kHz No voltage, voltage or NPN open collector, 24 VAC/VDC supply
EEM-MA771 - Multi-functional energy measuring device with direct Rogowski connection and integrated Modbus/TCP interface for measuring electrical parameters in low-voltage installations up to 690 V. (phoenixcontact.com/empro-help)
Not in stock
Digital panel meter, DIN1/8 (48(h) x 96(w)), 2 line display with dual color change for actual value, output and option slots, DC voltage input ±199.99V and 1.0000 to 5.0000V, 100-240 VAC supply
Not in stock
MCR-S-1-5-UI-DCI - MCR current transducer, programmable and configurable, for measuring direct, alternating and distorted currents, input current 0 ... 0.2 A to 0 ... 11 A, configured
Not in stock
MACX MCR-EX-IDS-I-I-SP - Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
option board (Slot B), not compatible with K3N models, 1 relay (PASS) SPDT and 12 VDC 80mA sensor power supply
Monitoring relay 22.5mm wide, simultanious monitoring of phase sequence and loss in 3phase 3wire systems, One DPDT
Not in stock
E5CN accessory, quick link programming cable for the E5_N and CelciuX (EJ1) range, allows direct connection without requirement for communications card. USB connection to PC/Laptop and special connector for controller, Includes USB driver
Temp. controller, PROplus,1/16 DIN, (48 x 48)mm,1 x Pulsed voltage OUT,2 x Aux OUT,option unit,100-240V AC
Liquid Leakage Sensing Band (with color indication), 5 m length, greater flexibility and enables visual confirmation when the inner color appears
Temperature controller, 1/16DIN (48 x 48mm), relay output, ON/OFF control, J type thermocouple input, 100-240 VAC, 35-572 degrees F
VIP/S/FRONT-MC/KIT 1-8 - Pair of screw-clamp plugs to connect to VIP base module labeled 1-8
Not in stock
VIP/S/MC/KIT 25-32 - Pair of screw-clamp plugs to connect to VIP base module labeled 25-32.
Not in stock
