Electrical Enclosures

TS Bayed enclosure system, WHD: 800x2000x400 mm, Sheet steel, with mounting plate, single door at the front

For mounting wallmount enclosures to the floor in accordance with floormount standards. Carbon steel, 12ga, RAL 7035.

For fan-and-filter units/outlet filters. When mounted over the fan-and-filter unit and outlet filter, a protection category of IP 56 (UL 3R) to EN 60529/10.91 is achieved. Particularly suitable for use in the food industry.

WM121206N4WM 12X12X6 304 #4 BRUSHED

Side panels, screw-fastened, stainless steel 316, for TS.

WM364812NC Enclosure, 36Hx48Wx12D, CARBON STEEL 7035

AX Compact enclosure, WHD: 600x600x350 mm, sheet steel, with mounting plate, single-door, with two cam locks

JB060404HCJB 6X4X4 HINGED COVER N4

SK fine filter mats, for filter fans, for SK 3238…,, WHD: 120 x 120 x 12 mm

SZ Wall mounting bracket, sheet steel, galvanized, Wall distance 40 mm

HD Compact enclosure, WHD: 810x650(H1)x821(H2)x300 mm, Stainless steel 1.4301, with mounting plate, with hinged door and silicone seal

TP One-piece console, WHD1: 1000x960x400/T2: 520 mm, Sheet steel

SK metal filters, for cooling unit, Air/air heat exchanger and Chiller, WHD: 344 x 268 x 10 mm

AX Operating housing with handle strips, WHD: 500x500x210 mm, sheet steel, aluminium handle strips, servicing access from the rear

DK Cable shunting ring, DxH: 85x43 mm, zinc-plated

PB02225M1C2 MINI PUSHBUTTON ENCLOSURE

SK cooling unit Blue e+, wall-mounted, 2.6 kW, 110-240 V, 1~, 380-480 V, 3~, 50-60 Hz, Sheet steel, WHD: 450 x 1600 x 294 mm

SK fan and filter units TopTherm, 105/120 m³/h, 230 V, 1~, 50/60 Hz, WHD: 204 x 204 x 24 mm, EMC

TS Bayed enclosure system, WHD: 800x2000x800 mm, Sheet steel, with mounting plate, single door at the front

SK filter mat, for wall-mounted-cooling unit SK 3302/3303/3361, for Air/air heat exchanger 3126, WHD: 265 x 200 x 10 mm