Terminal blocks

FBS 50-6 BU - Plug-in bridge, pitch: 6.2 mm, number of positions: 50, color: blue

PT 2,5-TG - Disconnect terminal block, Current and voltage are determined by the plug used., nom. voltage: 400 V, nominal current: 20 A, connection method: Push-in connection, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting: NS 35/7,5, NS 35/15, color: gray

End cover, depth: 50.3 mm, width: 2.2 mm, height: 99.5 mm, color: gray

ZS4 Terminal Block, 5.2mm, GRY, 20A, #24-12awg

Cable duct - CD 60X60

PTTBS 2,5-PV - Double-level terminal block, with equipotential bonder, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1 level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

UT 4-QUATTRO - Feed-through terminal block, nom. voltage: 500 V, nominal current: 32 A, number of connections: 4, connection method: Screw connection, Rated cross section: 4 mm2, cross section: 0.14 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

PTTB 2,5 BU - Double-level terminal block, nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: blue

Power Dist Blk, 3P, 1(#8-2/0):6(#14-4), 115A

ZK2.5-D2 DOUBLE DECK TB

Marker for terminal blocks - UM1-TM (5X12)

AI 2,5 -12 BU - Ferrule, sleeve length: 12 mm, color: blue

PTFIX 6/18X2,5 GY - Distribution block, Basic terminal block with supply, nom. voltage: 450 V, nominal current: 24 A, number of connections: 19, connection method: Push-in connection, Load contact, cross section: 0.14 mm2 - 4 mm2, Push-in connection, Line contact, Rated cross section: 6 mm2, cross section: 0.5 mm2 - 10 mm2, mounting type: for snapping onto a DIN rail adapter, Direct mounting with flange, Free-hanging, color: gray

PT 2,5-3PV - Multi-level terminal block, with equipotential bonder, nom. voltage: 500 V, nominal current: 20 A, number of connections: 6, connection method: Push-in connection, 1st, 2nd and 3rd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

ST 4-PE - Spring cage ground terminal block, number of connections: 2, connection method: Spring-cage connection, 1 level, cross section: 0.08 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow

Marker for terminal blocks - UC-TM 5

AI 0,5 - 8 WH-B - Ferrule, sleeve length: 8 mm, color: white

JUMPER BAR JB5-10

AI 2,5 - 8 BU - Ferrule, sleeve length: 8 mm, color: blue

Conductor marker carrier - PATG 1/15