Connectors

G-INS-PG13,5-S68N-PNES-GY - Cable gland, material for screw connection: PA, application: Standard, external cable diameter 6 mm ... 12 mm, shielding: no, connecting thread: Pg13.5, color: silver-grey RAL 7001

I/O connection cable, FCN40 to MIL40, 1 m

D-PTV 2,5/4-QUATTRO - End cover, depth: 45.7 mm, width: 2.2 mm, height: 69.2 mm, color: gray

D-UT 2,5-3L - End cover, depth: 69.8 mm, width: 2.2 mm, height: 90 mm, color: gray

DLKB 2,5-PE - Motor terminal block, four-level, bridgeable, with PE foot, cross section: 0.2 mm2 - 4 mm2, AWG: 24 - 12, connection method: screw connection, width: 6.2 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

HC-STA-B16-HHFD-1TTM32-EL-AL - Sleeve housing B16, for double locking latch, material: Die-cast aluminum, salt water resistant, cable outlets: 1, straight, 1x M32, height: 76 mm, cable gland: none, Standard

SACC-M 8MS-3PCON - Connector, Universal, 3-position, Plug straight M8, coding: A, Piercecon® fast connection, knurl material: Brass, nickel-plated, external cable diameter 3 mm ... 5 mm

HC-B 16-I-UT-M - Contact insert, number of positions: 16+PE, size: B16, number of connections per position: 1, Pin, Screw connection, 500 V, 16 A, 0.5 mm2 ... 2.5 mm2, application: Power

FBSR 10-5 - Plug-in bridge, pitch: 5.2 mm, number of positions: 10, color: red

Tool set - CRIMPSET 6

PT 10 BU - Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, number of connections: 2, connection method: Push-in connection, Rated cross section: 10 mm2, cross section: 0.5 mm2 - 16 mm2, mounting type: NS 35/7,5, NS 35/15, color: blue

PT 4-TG - Disconnect terminal block, Current and voltage are determined by the plug used., nom. voltage: 500 V, nominal current: 20 A, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting: NS 35/7,5, NS 35/15, color: gray

Thermal transfer printer set - THERMOMARK GO.K SET

Cable duct - CD 30X40

PT 4-TWIN - Feed-through terminal block, nom. voltage: 800 V, nominal current: 32 A, number of connections: 3, connection method: Push-in connection, Rated cross section: 4 mm2, cross section: 0.2 mm2 - 6 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

ST 16-PE - Spring cage ground terminal block, number of connections: 2, connection method: Spring-cage connection, 1 level, Rated cross section: 16 mm2, cross section: 0.2 mm2 - 25 mm2, mounting type: NS 35/7,5, NS 35/15, color: green-yellow

CUTFOX 18 - Cable cutter, angled, for copper and aluminum up to 18 mm diameter (up to 50 mm2)

UK 5-HEDI N - Lever-type disconnect terminal block, nom. voltage: 500 V, nominal current: 16 A, connection method: Screw connection, Rated cross section: 1.5 mm2, cross section: 0.2 mm2 - 6 mm2, mounting: NS 35/7,5, NS 35/15, NS 32, color: black/orange

Laser marker - TOPMARK NEO SET

Marker for terminal blocks - UC-TMF 5