Activation des dispositifs de commutation

JSM 50G is a bottom plate for mounting two actuators like MKey keys on a JSHD4 three-position device. Safety interlock switches are used for monitoring the position of the three-position device when not used. If the safety interlock switches are MKey5, use bracket JSM5B for them.

-10 ºC Température de fonctionnement [Min] Interrupteur d'habilitation

-10 ºC Température de fonctionnement [Min] Interrupteur d'habilitation

JSHD4 AL is a JSHD4 bottom part with a holder for an Eva actuator, a cable gland and 10 screw connections. It is used with any JSHD4 top part to form a complete three-position device. A JSM54 is ordered separately to be used with the Adam sensor. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Câble d'extension de 10 m de long avec connecteur

-10 ºC Température de fonctionnement [Min] Commutateur d'habilitation avec support vertical

The JSHD4-1-AA is an ergonomic three-position device which top part has no LED and no extra button, and which bottom part is equipped with a cable gland and 5 screw connections. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Safeball Coat is an extra protection for the Safeball JSTD1. It is made of silicone.

JSHD4H2B 0.15m is a three-position device for external panel mounting with 6 leads, each 150mm long, and mounting holes up right. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4H2 1.2m is a three-position device for internal panel mounting with 6 leads, each 1200mm long.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

The JSHD4-2 Black is a black top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Bottom part with M12-8 male connector and emergency stop button.

JSHD4 Anti-tamper is used to detect that the JSHD4 three-position device is actually activated by a hand. It can be used with any combination of top part and bottom part except top part JSHD4-1 and bottom part JSHD4 AK.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

Câble d'extension de 10 m de long avec connecteur

Câble de 9 m de long avec fils volants

Câble de 10 m de long avec fils volants

Mini-connecteur femelle à 10 broches Réceptacle de câble

Mini-connecteur femelle à 4 broches Réceptacle de câble

Réceptacle de câble Micro Connecteur femelle à 4 broches

Mini-connecteur femelle à 8 broches Réceptacle de câble