JSM 50G
Distributeur OfficielBy ABB
SKU
ABB2TLA020205R6300
MPN
2TLA020205R6300
Weight
0.097 kg
JSM 50G is a bottom plate for mounting two actuators like MKey keys on a JSHD4 three-position device.
Safety interlock switches are used for monitoring the position of the three-position device when not used. If the safety interlock switches are MKey5, use bracket JSM5B for them.
Spécifications techniques
Dimensions
| Produit Longueur Net | 3 mm |
| Produit Hauteur Net | 73 mm |
| Produit Largeur Net | 50 mm |
| Poids net | 0,097 kg |
Technique
| Adapté pour | JSHD4, Mkey5 |
Pourquoi Proax pour ABB JSM 50G?
Proax est un distributeur autorisé de ABB JSM 50G et l'un des plus grands distributeurs de ABB en Amérique du Nord. Notre équipe technique interne, qui est hautement qualifiée, est prête à répondre à vos besoins techniques!
Avez-vous une question? pour vous aider à obtenir le bon produit le plus rapidement possible pour votre projet. Nous sommes toujours là pour vous aider!
Délai de livraison court
Personnel qualifié
Chat en direct
Support technique
Inventaire local
60+ ans d'expérience
Informations complémentaires
| Autres noms | JSM50G |
| Taille de l'emballage | 1 |
Recommandé
JSM 50H is a bottom plate for mounting an Eva actuator on a JSHD4 three-position device in order to monitor the position of the JSHD4 when not in use. An Adam safety sensor must be used with Eva. Adam and Eva are sold separately.
JSM 54A is a wall bracket to mount the Adam safety sensor when a JSHD4 three position device with an AL bottom part is used. The AL bottom part has a holder for the Eva actuator. Adam and Eva are ordered separately.
JSHD4 Coat is an extra protection for the JSHD4 three-position device. It is made of silicone.
Sliding lock for Eden on conventional doors. Made in steel, yellow. Eden is not included.
JSHD4 AL is a JSHD4 bottom part with a holder for an Eva actuator, a cable gland and 10 screw connections. It is used with any JSHD4 top part to form a complete three-position device. A JSM54 is ordered separately to be used with the Adam sensor. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AD is a JSHD4 bottom part with a M12-8 male connector. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AC is a JSHD4 bottom part with a M12-5 male connector. It is used with a JSHD4-1 top part to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AB is a JSHD4 bottom part with a Cannon 12 pin male connector. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AA is a JSHD4 bottom part with a cable gland and 5 screw connections. It is used with a JSHD4-1 top part to form a complete three-position device.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AH is a JSHD4 bottom part with a cable gland and 10 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 AJ is a JSHD4 bottom part with a cable gland and PCB with 16 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
JSHD4 Anti-tamper is used to detect that the JSHD4 three-position device is actually activated by a hand. It can be used with any combination of top part and bottom part except top part JSHD4-1 and bottom part JSHD4 AK.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
The JSHD4-3 is a top part of a three-position device JSHD4. It has LEDs, and no extra buttons. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
The JSHD4-2 is a top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
The JSHD4-4 is a top part of a three-position device JSHD4. It has LEDs and a front button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
The JSHD4-2 Black is a black top part of a three-position device JSHD4. It has LEDs, a front button and a top button. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
The JSHD4-3 is a top part of a three-position device JSHD4. It has no LEDs and no extra buttons. It must be used with one of the following bottom parts: AB, AD, AH, AJ, AK, AL. Anti-tamper can be chosen as option with all except bottom part AK. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.
