Activation des dispositifs de commutation

Mini-connecteur mâle à 4 broches Fiche de court-circuitage

Micro-connecteur mâle à 4 broches Fiche de court-circuitage

Mini-connecteur mâle à 8 broches Fiche de court-circuitage

-10 ºC Température de fonctionnement [Min] Commutateur d'habilitation avec support horizontal

-10 ºC Température de fonctionnement [Min] Commutateur d'habilitation avec support vertical

-10 ºC Température de fonctionnement [Min] Commutateur d'habilitation avec support vertical

Couverture

Câble de 10 m de long avec fils volants

Câble de 9 m de long avec fils volants

The JSHD4-1-AC is an ergonomic three-position device which top part has no LED and no extra button, and which bottom part is equipped with a M12-5 connector. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

The JSHD2C Type E is a three-position pushbutton with gold plated contacts and 3 leads, each 190 mm. The force needed to actuate the push-button from middle to bottom is 20 N.Three-position pushbuttons are usually used in pair in a three-position device.

The JSHD2C Type A is a three-position pushbutton with gold plated contacts and 3 leads, each 190 mm. The force needed to actuate the push-button from middle to bottom is 17 N. Three-position pushbuttons are usually used in pair in a three-position device.

The JSHD2C Type K is a three-position pushbutton with silver plated contacts and 2 leads, each 290 mm. The force needed to actuate the push-button from middle to bottom is 20 N. Three-position pushbuttons are usually used in pair in a three-position device.

The JSHD2C Type F is a three-position pushbutton with gold plated contacts and 3 leads, each 1250 mm. The force needed to actuate the push-button from middle to bottom is 20 N. Three-position pushbuttons are usually used in pair in a three-position device.

JSHD4H2A 0.15m is a three-position device for external panel mounting with 6 leads, each 150mm long, and mounting holes up left.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AA is a JSHD4 bottom part with a cable gland and 5 screw connections. It is used with a JSHD4-1 top part to form a complete three-position device.Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AB is a JSHD4 bottom part with a Cannon 12 pin male connector. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AC is a JSHD4 bottom part with a M12-5 male connector. It is used with a JSHD4-1 top part to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AD is a JSHD4 bottom part with a M12-8 male connector. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.

JSHD4 AH is a JSHD4 bottom part with a cable gland and 10 screw connections. It is used with any JSHD4 top part, except JSHD4-1, to form a complete three-position device. Three-position devices are used to allow a limited movement of the machine when the operator is in the dangerous area, for example during troubleshooting, test running and programming.