CADFR
Cart

Contrôleurs de sécurité programmables

108 articles
CP1W-20EDT
Module d'extension de 8 sorties numériques
40 Stock du fabricant
USA
40
DST1-MD16SL-1
20 Borne d'entrée/sortie de sécurité (E/S)
Pas en stock
SM560-S
SM560-S AC500 SAFETY CPU MODULE
Pas en stock
TU582-S
TU582-S S500,SAFETY I/O TERMINAL UNIT
Pas en stock
DI581-S
DI581-S S500,SAFETY DIG. INPUT MODULE
Pas en stock
DX581-S
DX581-S S500, SAFETY DIGITAL I/O MODULE
Pas en stock
Pluto D20
Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.Safety PLC with Pluto safety bus and analogue inputs. Totally 20 I/O: 4 combined failsafe analogue and digital inputs + 4 failsafe inputs + 8 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs + 2 individually failsafe transistor outputs. Analogue input range 0-10V/4-20mA.
Pas en stock
Contact block 7 grey
Contact block for safety relays and Pluto. 7 screws. Grey.
Pas en stock
Pluto O2
Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.Safety PLC output module with Pluto safety bus. Safety output module. Totally 6 I/O: 2 Failsafe inputs for monitoring + 2 non-failsafe outputs/failsafe inputs + 2 individually failsafe relay outputs (with 3 contacts each).
Pas en stock
PCABLE-100
CAN-Bus cable 2x0.75mm2, yellow. UL & CSA approved. 100 meter ring.
Pas en stock
PCABLE-500
CAN-Bus cable 2x0.75mm2, yellow. UL & CSA approved. 500 meter drum.
Pas en stock
GATE-EC
Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol EtherCAT.With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.
Pas en stock
XW4G-05C4-TF-D
Connecteur à pince multi-branches parallèle DeviceNet avec vis
102 Stock du fabricant
USA
102
Tina 10B v2
TIna 10B v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution with possibility to connect a local reset button. Tina 10B has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the local reset button.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.
Pas en stock
M12-CANend
M12-5 plug with Pluto safety bus termination resistor for encoders. To be used when the encoder is at one end of the Pluto safety bus.
Pas en stock
Pluto D45 (Harsh Env)
Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.Safety PLC with Pluto safety bus and analogue inputs. Totally 45 I/O: 8 combined failsafe analogue and digital inputs + 16 failsafe inputs + 15 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs. Analogue input range 0-10V/4-20mA. Coated PCBs.
Pas en stock
Pluto cable CP400
Pluto cable, HMI-panel ABB CP400 to Pluto programming port.
Pas en stock
Tina 2B
Tina 2B is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2B is placed inside the safety device enclosure.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.
Pas en stock
Tina 3Aps
Tina 3Aps is used for adaptation of devices with two positively driven force-guided contacts like E-stop buttons and key switches, to the DYNlink solution, with extra conductor for the supply of the safety device. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop. Connection to +24VDC and 0V on the device side.
Pas en stock
Pluto B42 AS-i
Pluto is a cost effective, powerful and compact safety PLC for all machine safety applications. Most safety devices on the market can be connected directly to Pluto and multiple safety sensors can be connected to a single input and still achieve the highest safety level. Programming is done easily in the accompanying software Pluto Manager.Safety PLC with AS-i bus and Pluto safety bus. Totally 42 I/O: 20 failsafe inputs + 16 non-failsafe outputs/failsafe inputs + 4 individually failsafe relay outputs + 2 individually failsafe transistor outputs.
Pas en stock