Démarreurs manuels

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

TRANSFORMER PROTECT CB 0.16 - 0.25A

TRANSFORMER PROTECT CB 0.4 - 0.63A

The MS132-20L lamp circuit breaker is a compact 45 mm width device with a rated operational current of Ie = 20.0 A. This device is used to manually switch on and off lamp loads (and loads with similar characteristics) and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. The lamp circuit breaker offers a rated service short-circuit breaking capacity Ics = 100 kA at 400 VAC. Further features are the build-in disconnect function, temperature compensation, trip-free mechanism and a rotary handle with a clear switch position indication. The lamp circuit breaker is suitable for three- and single-phase applications. The handle is lockable to protect against unauthorized changes. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and terminal spacers are available as accessory.

Cr101 Manual Motor-starting switches are designed for use with self-protected 1Ph & 3Ph motors, ON/OFF applications where overload protection is not required. 2HP//240Vac

Cr101 Manual Motor-starting switches are designed for use with self-protected 1Ph & 3Ph motors, ON/OFF applications where overload protection is not required. 2HP//240Vac

Cr101 Manual Motor-starting switches are designed for use with self-protected 1Ph & 3Ph motors, ON/OFF applications where overload protection is not required. 2HP//240Vac

Cr101 Manual Motor-starting switches are designed for use with self-protected 1Ph & 3Ph motors, ON/OFF applications where overload protection is not required. 2HP//240Vac

Cr101 Manual Motor-starting switches are designed for use with self-protected 1Ph & 3Ph motors, ON/OFF applications where overload protection is not required. 2HP//240Vac

MS165 MO165 3 PHASE BUSBAR 3 MMS

PS2-3-0-125 3-phase busbars ensure a quick and safe connection of 3 MS165 manual motor starters without lateral auxiliary contacts and are therefore a cost effective solution. The rated current is 125 A.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

CR1062 manual motor staters for small motors (1 -10HP) , Availible in 1,2,3Pole configurations for Open and NEMA type 1,3R, 4X enclosures.

Motor Protection Circuit Breaker, Push-In Plus Terminals, Current setting range thermal overload release 0.63 - 1.00 A, H×W×D 130 x 45 x 71 mm

Motor Protection Circuit Breaker, Push-In Plus Terminals, Current setting range thermal overload release 11 - 16 A, H×W×D 130 x 45 x 71 mm

Motor Protection Circuit Breaker, Push-In Plus Terminals, Current setting range thermal overload release 1 - 1.6 A, H×W×D 130 x 45 x 71 mm