Composants de sécurité des machines

M12-C103 is a shielded cable with a straight M12-8 female connector and a free end. The eight conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 10 meters.

Bloc d'interrupteurs à contact normalement fermé (NC)

Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol EtherNet I/P.With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.

Orion2 Base Light Grids, Transmitter + Receiver, 4 beams, Protected height=1200mm, Range=0.5-50m, Type 4.Orion2 Base is a compact light grid for access protection. The light grid has 2-4 beams and is intended for body detection. With an operating distance of 50 m between transmitter and receiver the light grid is suitable for applications with deviating mirrors.

750 mm Hauteur protégée Barrière immatérielle

Plaque de légende de 60 mm de diamètre pour l'arrêt d'urgence

910 mm Hauteur protégée Barrière immatérielle cascadable de type avancé

External program memory, 10 kbyte. For projects with only one Pluto the memory can store the PLC program. Can also be used to give Pluto AS-i a specific address.IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

V/F 430-F Ethernet cable M12 plug on camera to RJ45 connector, 5 m

Support de montage inférieur/côté

Paire de barrières immatérielles de sécurité TX + RX, hauteur de protection 320mm/12", résolution 25mm

M12-C63 is a shielded cable with a straight M12-8 female connector and a free end. The eight conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 6 meters.

Câble récepteur, M12 5P(F) x 3 mtr extrémité ouverte, BLK, pour F3SG-RA/SRA/SRB

Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.

Paire de barrières immatérielles de sécurité TX + RX, hauteur de protection 1600mm/63", résolution 25mm

Paire de barrières immatérielles de sécurité TX + RX, hauteur de protection 1840mm/72", résolution 25mm

M12-C312 is a shielded cable with straight M12-5 male and female connectors. The five conductors have a cross section of 0.34 mm2. The shield is connected to pin 3 (0V) on the male connector. The jacket is made of black PVC. The length of the cable is 3 meters.

Diamètre de tête de 40 mm et éclairage non lumineux Interrupteur d'arrêt d'urgence

Safety rope pull E-stop switch, up to 40m, 2 NC + 1 NO, wiring 3x 1/2 in. NPT

Ensemble de supports de montage latéral/arrière standard (2 pièces) pour la barrière immatérielle F3SG-4SR