M12-C04

M12-C03 is a straight M12-8 female connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-3G is a M12 Y-connector for series connection of Adam OSSD M12-8 safety sensor with M12-8 cables. Connector #2 is a M12-8 female connector for connection of the safety sensor, connector #1 is a M12-8 male connector for connecting +24VDC, 0V and the incoming OSSD signals, and connector #3 is a M12-8 female connector for continuation of the circuit towards another safety device or the safety control device.

M12-3H is a M12 Y-connector for series connection of Adam OSSD M12-8 safety sensor with M12-5 cables. Connector #2 is a M12-8 female connector for connection of the safety sensor, connector #1 is a M12-5 male connector for connecting +24VDC, 0V and the incoming OSSD signals, and connector #3 is a M12-5 female connector for continuation of the circuit towards another safety device or the safety control device.

M12-C02 is a straight M12-5 male connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-3S is a M12 Y-connector for series connection of DYNlink devices with the StatusBus function. Connector #2 is a M12-5 female connector for connection of the DYNLINK safety device, connector #1 is a M12-5 male connector for connection of +24VDC, 0V, the incoming DYNlink signal and the StatusBus and connector #3 is a M12-5 female connector for the outgoing inverted DYNlink signal towards another DYNlink safety device or safety controller/PLC.

M12-C01 is a straight M12-5 female connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-3D is a M12 Y-connector that simplifies the connection of a light guard with transmitter and receiver. Connector #2 is a M12-8 female connector for the receiver, connector #3 is a M12-5 female connector for the transmitter, and connector #1 is a M12-8 male connector for the cable to the safety control unit.

M12-3E is a M12 Y-connector for the connection of 2 DYNlink devices or one DYNlink device and one light button to Pluto safety PLC with only one cable. Connector #2 is a M12-5 female connector for connection of the first circuit. Connector #3 ia a M12-5 female connector for connection of the second circuit. Connector #1 is a M12-5 male connector for connection to IQs on the Pluto safety PLC.

M12 protection cap is used to protect a M12 male connector from dust.

M12-3B is a M12 Y-connector for parallel connection of 2 DYNlink devices such as Eden sensors, and Tina adapters. Connectors #2 and #3 are M12-5 female connectors for connection of the DYNlink safety devices and connector #1 is a M12-5 male connector for connection to the DYNlink loop.

M12-3A is a M12 Y-connector for series connection of DYNlink devices such as Eden sensors, Smile Tina and Inca Tina emergency stop buttons, and Tina adapters. Connector #2 is a M12-5 female connector for connection of the safety device, connector #1 ia a M12-5 male connector for connection of +24VDC, 0V and the incoming DYNlink signal and connector #3 is a M12-5 female connector for continuation of the circuit towards another DYNlink safety device or safety controller/PLC.

Tina 11A is a connection block for serie connection of two DYNlink devices with M12-5 connectors. Two M12-5 female connectors for the devices and one M12-5 male connector towards the DYNlink loop.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

20-054-16, Tina 10C

TIna 10C v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution with possibility to power the transmitter. Tina 10C has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the supply of the transmitter (0V and +24VDC).The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

TINA 5A VER G

M12-C101V2 Cable

Tina 3Aps is used for adaptation of devices with two positively driven force-guided contacts like E-stop buttons and key switches, to the DYNlink solution, with extra conductor for the supply of the safety device. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop. Connection to +24VDC and 0V on the device side.

M12-C201 is a shielded cable with a straight M12-5 female connector and a free end. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 20 meters.

Tina 10B Unité d'adaptation où les sorties OSSD (PNP) de Focus II peuvent être transformées en circuits dynamiques.

TIna 10B v2 adapts the OSSD outputs of ABB optical safety devices to the DYNlink solution with possibility to connect a local reset button. Tina 10B has one M12-5 male connector towards the DYNlink loop, one M12-8 female connector towards the OSSD device and one M12-5 female connector for the local reset button.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.