M12-3E

M12-3B is a M12 Y-connector for parallel connection of 2 DYNlink devices such as Eden sensors, and Tina adapters. Connectors #2 and #3 are M12-5 female connectors for connection of the DYNlink safety devices and connector #1 is a M12-5 male connector for connection to the DYNlink loop.

M12-3D is a M12 Y-connector that simplifies the connection of a light guard with transmitter and receiver. Connector #2 is a M12-8 female connector for the receiver, connector #3 is a M12-5 female connector for the transmitter, and connector #1 is a M12-8 male connector for the cable to the safety control unit.

M12-3A is a M12 Y-connector for series connection of DYNlink devices such as Eden sensors, Smile Tina and Inca Tina emergency stop buttons, and Tina adapters. Connector #2 is a M12-5 female connector for connection of the safety device, connector #1 ia a M12-5 male connector for connection of +24VDC, 0V and the incoming DYNlink signal and connector #3 is a M12-5 female connector for continuation of the circuit towards another DYNlink safety device or safety controller/PLC.

M12-3S is a M12 Y-connector for series connection of DYNlink devices with the StatusBus function. Connector #2 is a M12-5 female connector for connection of the DYNLINK safety device, connector #1 is a M12-5 male connector for connection of +24VDC, 0V, the incoming DYNlink signal and the StatusBus and connector #3 is a M12-5 female connector for the outgoing inverted DYNlink signal towards another DYNlink safety device or safety controller/PLC.

M12-3G is a M12 Y-connector for series connection of Adam OSSD M12-8 safety sensor with M12-8 cables. Connector #2 is a M12-8 female connector for connection of the safety sensor, connector #1 is a M12-8 male connector for connecting +24VDC, 0V and the incoming OSSD signals, and connector #3 is a M12-8 female connector for continuation of the circuit towards another safety device or the safety control device.

M12-3H is a M12 Y-connector for series connection of Adam OSSD M12-8 safety sensor with M12-5 cables. Connector #2 is a M12-8 female connector for connection of the safety sensor, connector #1 is a M12-5 male connector for connecting +24VDC, 0V and the incoming OSSD signals, and connector #3 is a M12-5 female connector for continuation of the circuit towards another safety device or the safety control device.

M12-C02 is a straight M12-5 male connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-C01 is a straight M12-5 female connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-C03 is a straight M12-8 female connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12-C04 is a straight M12-8 male connector with cable screw connection. The range of the cable diameter is 2.5–6.5 mm.

M12 protection cap is used to protect a M12 male connector from dust.

Tina 3A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 3A is mounted directly on the device enclosure to a M20 cable entry and has a M12-5 male connector for connection to the DYNlink loop.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 2A is used for adaptation of devices with two positively driven force-guided contacts like emergency stop buttons and key switches, to the DYNlink solution. Tina 2A is mounted directly on the device enclosure to a M20 cable entry.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 4A is a connection block for series connection of up to four DYNlink devices. Four M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 4A must be equipped with Tina 1A blind plugs.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

M12-C61 V 6 m de câble 5 × 0,34 mm2 + écran avec connecteur M12 femelle coudé.

Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

M12-C61 is a shielded cable with a straight M12-5 female connector and a free end. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 6 meters.

Tina 8A is a connection block for series connection of up to eight DYNlink devices. Eight M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 8A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 8A must be equipped with Tina 1A blind plugs.The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

M12-C31 is a shielded cable with a straight M12-5 female connector and a free end. The five conductors have a cross section of 0.34 mm2. The jacket is made of black PVC. The length of the cable is 3 meters.

Tina 6A Unité d'adaptation pour les circuits dynamiques. Tina 6A avec connecteurs M12 mâle et femelle pour la connexion du tapis de sécurité, de la bande et du pare-chocs.